Optimization of alloy design and hot rolling conditions for shape memory in Fe-Mn-Si-based alloys

被引：7

作者：

Stanford, Nicole Ellen ^{[1
]}

Dunne, Druce Patrick ^{[1
]}

机构：

[1] Univ Wollongong, Fac Engn, Wollongong, NSW 2522, Australia

来源：

ISIJ INTERNATIONAL | 2006年 / 46卷 / 11期

关键词：

shape memory; texture; thermomechanical processing; ferrous alloy;

D O I：

10.2355/isijinternational.46.1703

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effect of composition and hot rolling conditions on the shape memory effect (SME) in the Fe-Mn-Si-based system has been studied to obtain improved shape memory without the need to rely on "training". It has been found that the texture is not markedly affected by rolling conditions, and texture is therefore not a major factor in explaining variations in SME with processing conditions. Decreasing the pre-deformation temperature to below the M-s was found to have a beneficial effect on shape memory. It was found that the best SME was achieved in an alloy that had M-s just above room temperature, and had been processed by hot rolling followed by recovery annealing. Alloys of different compositions exhibited different optimum rolling temperatures for maximum shape memory performance.

引用

页码：1703 / 1711

页数：9

共 17 条

[1] Shape-memory effect and strengthening mechanism in a Nb and N-doped Fe-Mn-Si-based alloy
Ariapour, A
Yakubtsov, I
Perovic, DD
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (07): : 1621 - 1628
[2] Improvement of shape memory properties of NbC containing Fe-Mn-Si based shape memory alloys by simple thermomechanical treatments
Baruj, A
Kikuchi, T
Kajiwara, S
Shinya, N
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 378 (1-2): : 333 - 336
[3] Isothermal transformation products in a Cu-bearing high strength low alloy steel
Dunne, DP
Ghasemi, SS
Yu, D
[J]. ISIJ INTERNATIONAL, 1996, 36 (03) : 324 - 333
[4] DUNNE DP, 1995, J PHYS IV, V5, pC8415
[5] HUMPHREYS FJ, 1996, RECRYSTALLIZATION RE, P329
[6] INAGAKI H, 1992, Z METALLKD, V83, P90
[7] Jee KK, 2003, J PHYS IV, V112, P365, DOI [10.1051/jp4:2003902, 10.1051/jp4:200902]
[8] Remarkable improvement of shape memory effect in Fe-Mn-Si based shape memory alloys by producing NbC precipitates
Kajiwara, S
Liu, D
Kikuchi, T
Shinya, N
[J]. SCRIPTA MATERIALIA, 2001, 44 (12) : 2809 - 2814
[9] Li H, 1996, THESIS U WOLLONGONG
[10] Formation of surface texture and anisotropy of shape memory effect in an Fe-Mn-Si alloy
Matsumura, O
Furusako, S
Furukawa, T
Otsuka, H
[J]. ISIJ INTERNATIONAL, 1996, 36 (08) : 1103 - 1108

← 1 2 →