The development of the direct strength method for welded steel members with buckling interactions

The direct strength method (DSM) has been adopted by the NAS (2004) and AS/NZS 4600 (2005) for the design of cold-formed steel members. The method can be successfully applied to the design of welded and hot-rolled sections. This paper reviews the development of the DSM for welded steel structural members. The design strength formulae for welded section columns and beams for the DSM are provided based on the tests performed on welded H-section, C-section, circular and rectangular hollow section columns fabricated from steel plates whose nominal yield stress is 235 MPa or 315 MPa. The comparison between the design strength of welded sections predicted by the DSM and that estimated by existing specifications is provided. This paper verifies that the DSM which adopts the nominal axial strength and flexural strength in the AISC (2010) or ED (2004) can properly predict the ultimate strength of welded section columns and beams. (C) 2013 Elsevier Ltd. All rights reserved.