Ultrasonic analysis and lock-in thermography for debonding evaluation of composite adhesive joints

被引：84

作者：

Palumbo, D. ^{[1
]}

Tamborrino, R. ^{[2
]}

Galietti, U. ^{[1
]}

Aversa, P. ^{[2
]}

Tati, A. ^{[3
]}

Luprano, V. A. M. ^{[2
]}

机构：

[1] Politecn Bari, DMMM, Viale Japigia 182, I-70126 Bari, Italy

[2] Enea Res Ctr Brindisi, SS 7 Appia,Km 714, I-72100 Brindisi, Italy

[3] Enea Res Ctr Casaccia, Via Anguillarese 301, I-00123 Rome, Italy

来源：

NDT & E INTERNATIONAL | 2016年 / 78卷

关键词：

Glass-fiber reinforced plastic (GFRP); Adhesive joints; Ultrasonic C-scan; Lock-in thermography; NONDESTRUCTIVE EVALUATION; INFRARED THERMOGRAPHY;

D O I：

10.1016/j.ndteint.2015.09.001

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Glass-fiber reinforced thermosetting plastic adhesive joints were characterized through ultrasonic imaging and lock-in thermographic analysis for assessing the adhesion quality before being subjected to static tensile mechanical tests and to accelerated aging cycles. The mapping of each sample has been obtained. Visual testing were performed on all specimens after the mechanical tests in order to obtain a comparison with ultrasonic and lock-in thermography technique. A quantitative analysis has been carried out to evaluate the ability of lock-in thermography in investigating inadequate bonding and obtaining the validation of the technique by the consistency of the results with the well-established ultrasonic testing. (C) 2015 Published by Elsevier Ltd.

引用

页码：1 / 9

页数：9

共 50 条

[21] Detection of defects in wind turbine composite blades using statistically enhanced Lock-In Thermography
Manohar, Arun
di Scalea, Francesco Lanza
[J]. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2013, 12 (5-6): : 566 - 574
[22] Convective cooling evaluation of electronic devices using lock-in thermography
Swiatczak, T.
Wiecek, B.
Tomalczyk, K.
[J]. MIXDES 2007: PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON MIXED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS:, 2007, : 363 - 368
[23] Application of infrared lock-in thermography for the quantitative evaluation of bruises on pears
Kim, Ghiseok
Kim, Geon-Hee
Park, Jongmin
Kim, Dae-Yong
Cho, Byoung-Kwan
[J]. INFRARED PHYSICS & TECHNOLOGY, 2014, 63 : 133 - 139
[24] Thermographic inspection of water ingress in composite honeycomb sandwich structure: a quantitative comparison among Lock-in thermography algorithms
Shrestha, Ranjit
Choi, Manyong
Kim, Wontae
[J]. QUANTITATIVE INFRARED THERMOGRAPHY JOURNAL, 2021, 18 (02) : 92 - 107
[25] Study on Full-field Stress Analysis for Composite Material Structure using Lock-in thermography
Liu Junyan
Liu Xun
Wang Yang
[J]. ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1372 - 1376
[26] Quantitative optimization analysis of lock-in infrared thermography for characterizing delaminations
Sagarduy-Marcos, David
Batsale, Jean-Christophe
Rodriguez-Aseguinolaza, Javier
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2024, 231
[27] Application of the Pulse Infrared Thermography Method for Nondestructive Evaluation of Composite Aircraft Adhesive Joints
Kostroun, Tomas
Dvorak, Milan
[J]. MATERIALS, 2021, 14 (03) : 1 - 20
[28] Local efficiency analysis of solar cells based on lock-in thermography
Breitenstein, Otwin
[J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2012, 107 : 381 - 389
[29] Investigation of lock-in infrared thermography for evaluation of subsurface defects size and depth
Shrestha Ranjit
Kisoo Kang
Wontae Kim
[J]. International Journal of Precision Engineering and Manufacturing, 2015, 16 : 2255 - 2264
[30] Improved Deep Learning for Defect Segmentation in Composite Laminates Inspected by Lock-in Thermography
Marani, Roberto
Palumbo, Davide
Attolico, Michele
Bono, Giuseppe
Galietti, Umberto
D'Orazio, Tiziana
[J]. 2021 IEEE 8TH INTERNATIONAL WORKSHOP ON METROLOGY FOR AEROSPACE (IEEE METROAEROSPACE), 2021, : 226 - 231

← 1 2 3 4 5 →