Laser Shock Adhesion Test (LASAT) of EB-PVD TBCs: Towards an industrial application

被引：24

作者：

Begue, G. ^{[1
]}

Fabre, G. ^{[1
]}

Guipont, V. ^{[1
]}

Jeandin, M. ^{[1
]}

Bilhe, P. ^{[2
]}

Guedou, J. Y. ^{[2
]}

Lepoutre, F. ^{[3
]}

机构：

[1] MINES ParisTech, Competence Ctr Spray Proc, CNRS UMR 7633, Ctr Mat, F-91003 Evry, France

[2] Snecma, SAFRAN Grp, F-77550 Moissy Cramayel, France

[3] Off Natl Etud & Rech Aerosp, F-92320 Chatillon, France

来源：

SURFACE & COATINGS TECHNOLOGY | 2013年 / 237卷

关键词：

EB-PVD thermal barrier coating; Adhesion; LASAT; Piezospectroscopy; COATINGS; STRENGTH;

D O I：

10.1016/j.surfcoat.2013.07.026

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The assessment of the interface strength of EB-PVD thermal barrier coating (TBC) is a key issue to control the production and better understand the ceramic spallation that will occur during life duration of coated turbine blades. The Laser Shock Adhesion Test (LASAT) involving bi-dimensional shock wave propagation, namely the LASAT-2D, consists in measuring the interfacial crack diameter when implementing a set of laser shocks with increased laser power densities. From the resulting "LASAT-2D plots", adhesion strength could be obtained from tensile stress calculated at the interface with a finite element model of shockwave propagation combined to interface cracking criterion. This work is focusing on the qualitative approach to compare adhesion on TBC systems directly through LASAT-2D plots. Two different testing modes were investigated: the conventional MS mode when the laser irradiation is carried out on the metallic side of a TBC coupon and the newly developed CS mode for which the laser shock is implemented onto the ceramic side. The interfacial crack is revealed by the presence of a spot that could be measured on a top-view optical image of the ceramic. In this work, the actual relationship between spot diameter and interfacial inner crack size is clearly established for both MS and CS modes. It was achieved experimentally by examinations of SEM cross-sections or non-destructive piezospectroscopic measurements involving lifetime decay map of the photoluminescence signal. From LASAT-2D curves, the role of the laser conditions like laser shock diameter and substrate thickness is discussed. This discussion is illustrated through the results of the qualitative IASAT-2D method applied on two different TBC samples (as-coated and thermally-cycled). The final objective of this work is to enable a sound and relevant application of the LASAT on TBC systems for both modes. With this goal, the LASAT-2D CS was successfully applied directly on a TBC coated turbine blade. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：305 / 312

页数：8

共 18 条

[1] Evaluation of bonding strength between yttria coating and vanadium alloys for development of self-cooled blanket [J].

Akamatsu, Hitoshi ;

Satou, Manabu ;

Sato, Takashi ;

Jain, Amit ;

Gupta, Vijay ;

Hasegawa, Akira .

JOURNAL OF NUCLEAR MATERIALS, 2011, 417 (1-3) :1253-1256

[2]

Arrigoni M, 2004, AIP CONF PROC, V706, P1369, DOI 10.1063/1.1780492

[3] State-of-the-art laser adhesion test (LASAT) [J].

Berthe, L. ;

Arrigoni, M. ;

Boustie, M. ;

Cuq-Lelandais, J. P. ;

Broussillou, C. ;

Fabre, G. ;

Jeandin, M. ;

Guipont, V. ;

Nivard, M. .

NONDESTRUCTIVE TESTING AND EVALUATION, 2011, 26 (3-4) :303-317

[4]

Bolis C., 2007, J PHYS D, V40, P31

[5]

Bossi R, 2009, MATER EVAL, V67, P819

[6] Study of damage phenomena induced by edge effects into materials under laser driven shocks [J].

Boustie, M. ;

Cuq-Lelandais, J. P. ;

Bolis, C. ;

Berthe, L. ;

Barradas, S. ;

Arrigoni, M. ;

de Resseguier, T. ;

Jeandin, M. .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2007, 40 (22) :7103-7108

[7]

Cuq-Lelandais J.P., 2010, THESIS U POITIERS

[8] Effect of Water Vapor on the Spallation of Thermal Barrier Coating Systems During Laboratory Cyclic Oxidation Testing [J].

Deneux, V. ;

Cadoret, Y. ;

Hervier, S. ;

Monceau, D. .

OXIDATION OF METALS, 2010, 73 (1-2) :83-93

[9] LAser Shock Adhesion Test (LASAT) of Electron Beam Physical Vapor Deposited Thermal Barrier Coatings (EB-PVD TBCs) [J].

Fabre, G. ;

Guipont, V. ;

Jeandin, M. ;

Boustie, M. ;

Cuq-Lelandais, J. P. ;

Berthe, L. ;

Pasquet, A. ;

Guedou, J-Y. .

EURO SUPERALLOYS 2010, 2011, 278 :509-+

[10]

Fabre G., 2012, 8 INT S HIGH TEMP CO

← 1 2 →