Calorimetric Measurement of Stator Core Losses

被引：0
作者：
Singh, Deepak [1 ]
Arkkio, Antero [1 ]
机构：
[1] Aalto Univ, Dept Elect Engn, Espoo, Finland
来源：
2012 XXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM) | 2012年
关键词：
Calorimeter; Electrical machines; Stator; Core losses; ELECTRICAL STEEL SHEETS; STRESS;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Calorimetric method is an accurate method for loss measurement and has been used quite often to measure the losses of an electrical machine. However, segregating the measured losses to stator and rotor losses is impossible with the conventional calorimetric method. This study suggests a modified calorimetric method to measure the no-load stator core losses. The proposed calorimeter is constructed and the uncertainty regarding the measurement is also analyzed. Finally, the measured losses are compared with the FE simulated result.
引用
收藏
页码：1206 / 1211
页数：6
相关论文
共 12 条
  • [1] Arshad WM, 2007, IEEE IND APPLIC SOC, P94
  • [2] Coleman H.W., 1999, Experimentation and Uncertainty Analysis for Engineers
  • [3] Gilbert A. J., 1961, P IEE A, V108, P239
  • [4] Importance of punching and workability in non-oriented electrical steel sheets
    Kurosaki, Yousuke
    Mogi, Hisashi
    Fujii, Hiroyasu
    Kubota, Takeshi
    Shiozaki, Morio
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2008, 320 (20) : 2474 - 2480
  • [5] EFFECTS OF STRESS ON IRON LOSS AND FLUX DISTRIBUTION OF AN INDUCTION-MOTOR STATOR CORE
    MOSES, AJ
    RAHMATIZADEH, H
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 1989, 25 (05) : 4003 - 4005
  • [6] Aspects of the cut-edge effect stress on the power loss and flux density distribution in electrical steel sheets
    Moses, AJ
    Derebasi, N
    Loisos, G
    Schoppa, A
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2000, 215 : 690 - 692
  • [7] Nakata T., 1992, IEEE Translation Journal on Magnetics in Japan, V7, P453, DOI 10.1109/TJMJ.1992.4565422
  • [8] Effect of punching on electrical steels: Experimental and numerical coupled analysis
    Ossart, F
    Hug, E
    Hubert, O
    Buvat, C
    Billardon, R
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (05) : 3137 - 3140
  • [9] Pyrhonen J., 2014, Design of Rotating Electrical Machines, V2nd
  • [10] Influence of welding and sticking of laminations on the magnetic properties of non-oriented electrical steels
    Schoppa, A
    Schneider, J
    Wuppermann, CD
    Bakon, T
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2003, 254 : 367 - 369
12