Creep deformation mechanisms in coarse-grained solid solution Mg alloys

被引:39
作者
Chung, SW [1 ]
Watanabe, H
Kim, WJ
Higashi, K
机构
[1] Osaka Prefecture Univ, Dept Met & Mat Sci, Sakai, Osaka 5998531, Japan
[2] Hongik Univ, Dept Mat Sci & Engn, Seoul 121791, South Korea
[3] Osaka Municipal Tech Res Inst, Dept Mech Engn, Osaka 5368553, Japan
关键词
creep; magnesium alloys; high temperature deformation; transition;
D O I
10.2320/matertrans.45.1266
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Creep deformation behavior of coarse-grained Mg-Al based solid solution alloy (AZ31) was studied in a wide strain rate range of 2 x 10(-5)similar to7 x 10(-2) s(-1) at temperature range of 573similar to673 K. Viscous glide controlled creep (VGC), dislocation climb creep (DGC) and power law breakdown (PLB) showed up in order with increasing stress as the flow rate-control ling process. From the former results for Mg-Al and Mg-Al-Zn alloys, the creep mechanisms of VGC and DCC in Mg and Mg alloys are confirmed. Moreover. several theories presented for DCC and VGC are applied to convey the creep mechanisms in Mg and Mg alloys by analytical way. Transitions in Mg alloys are analyzed also by comparing experimental results and theories. Alloying effects on creep strength and transitions of deformation mechanism are analyzed.
引用
收藏
页码:1266 / 1271
页数:6
相关论文
共 34 条
[1]  
AHLERS M, 1970, METALL TRANS, V1, P2415
[2]   DIFFUSIVITY OF ZINC IN A MG-5.1 PERCENT ZN-0.6 PERCENT ZR ALLOY [J].
BHAMBRI, AK ;
KATTAMIS, TZ .
SCRIPTA METALLURGICA, 1971, 5 (01) :53-&
[3]  
CANNON WR, 1970, METALL TRANS, V1, P1030
[4]   CREEP AND DUCTILITY IN AN AL-CU SOLID-SOLUTION ALLOY [J].
CHAUDHURY, PK ;
MOHAMED, FA .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (12) :2105-2114
[5]  
Friedel J., 1964, DISLOCATIONS, P351
[6]  
Frost H.J., 1982, Deformation Mechanism Maps, P44
[7]  
GALLAGHER PC, 1970, METALL TRANS, V1, P2429
[8]  
HULL D, 2002, INTRO DISLOCATIONS, P20
[9]   Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures [J].
Kim, WJ ;
Chung, SW ;
Chung, CS ;
Kum, D .
ACTA MATERIALIA, 2001, 49 (16) :3337-3345
[10]   Quantitative Size-Factors for Metallic Solid Solutions [J].
King, H. W. .
JOURNAL OF MATERIALS SCIENCE, 1966, 1 (01) :79-90