The thermoluminescence response of doped SiO2 optical fibres subjected to photon and electron irradiations

被引:81
作者
Hashim, S. [1 ]
Al-Ahbabi, S. [2 ]
Bradley, D. A. [2 ]
Webb, M. [3 ]
Jeynes, C. [3 ]
Ramli, A. T. [1 ]
Wagiran, H. [1 ]
机构
[1] Univ Teknol Malaysia, Dept Phys, Johor Darul, Takzim, Malaysia
[2] Univ Surrey, Dept Phys, Guildford GU2 7XH, Surrey, England
[3] Univ Surrey, Surrey Ion Beam Ctr, Guildford GU2 7XH, Surrey, England
基金
英国工程与自然科学研究理事会;
关键词
Thermoluminescence; SiO2 optical fibres; Dopants; PIXE and RBS analysis;
D O I
10.1016/j.apradiso.2008.06.030
中图分类号
O61 [无机化学];
学科分类号
070301 ; 081704 ;
摘要
Modern linear accelerators, the predominant teletherapy machine in major radiotherapy centres worldwide, provide multiple electron and photon beam energies. To obtain reasonable treatment times, intense electron beam currents are achievable. In association with this capability, there is considerable demand to validate patient dose using systems of dosimetry offering characteristics that include good spatial resolution, high precision and accuracy. Present interest is in the thermoluminescence response and dosimetric utility of commercially available doped optical fibres. The important parameter for obtaining the highest TL yield during this study is to know the dopant concentration of the SiO2 fibre because during the production of the optical fibres, the dopants tend to diffuse. To achieve this aim, proton-induced X-ray emission (PIXE). which has no depth resolution but can unambiguously identify elements and analyse for trace elements with detection limits approaching mu g/g, was used. For Al-doped fibres, the dopant concentration in the range 0.98-2.93 mol% have been estimated, with equivalent range for Ge-doped fibres being 0.53-0.71 mol%. In making central-axis irradiation measurements a solid water (TM) phantom was used. For 6-MV photons and electron energies in the range 6, 9 and 12 MeV, a source to surface distance of 100 cm was used, with a dose rate of 400 cGy/min for photons and electrons. The TL measurements show a linear dose-response over the delivered range of absorbed dose from I to 4 Gy. Fading was found to be minimal, less than 10% over five days subsequent to irradiation. The minimum detectable dose for 6-MV photons was found to be 4, 30 and 900 mu Gy for TLD-100 chips, Ge- and Al-doped fibres, respectively. For 6-, 9- and 12-MeV electron energies, the minimum detectable dose were in the range 3-5, 30-50 and 800-1400 mu Gy for TLD-100 chip, Ge-doped and Al-doped fibres, respectively. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:423 / 427
页数:5
相关论文
共 11 条
[1]  
AZNAR M, 2002, J REAL TIME OPTICAL
[2]  
BRICHARD B, 2000, RAD EFFECTS SILICA O
[3]   Measurement of nanosize etched pits in SiO2 optical fiber conduit using AFM [J].
Espinosa, G ;
Golzarri, JI ;
Vázquez, C ;
Fragoso, R .
RADIATION MEASUREMENTS, 2003, 36 (1-6) :175-178
[4]  
Espinosa G., 2006, RADIAT PROT DOSIM, V18, P1
[5]   The ''Q factor'' method: Quantitative microPIXE analysis using RBS normalisation [J].
Grime, GW .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1996, 109 :170-174
[6]   RECENT DEVELOPMENTS IN DATA-ACQUISITION AND PROCESSING ON THE OXFORD SCANNING PROTON MICROPROBE [J].
GRIME, GW ;
DAWSON, M .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1995, 104 (1-4) :107-113
[7]  
Huston AL, 2002, RADIAT PROT DOSIM, V101, P23, DOI 10.1093/oxfordjournals.rpd.a005974
[8]   Dopant diffusion during optical fibre drawing [J].
Lyytikäinen, K ;
Huntington, ST ;
Carter, ALG ;
McNamara, P ;
Fleming, S ;
Abramczyk, J ;
Kaplin, I ;
Schötz, G .
OPTICS EXPRESS, 2004, 12 (06) :972-977
[9]   The new Surrey ion beam analysis facility [J].
Simon, A ;
Jeynes, C ;
Webb, RP ;
Finnis, R ;
Tabatabian, Z ;
Sellin, PJ ;
Breese, MBH ;
Fellows, DF ;
van den Broek, R ;
Gwilliam, RM .
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2004, 219 :405-409
[10]  
YOUSSEF AA, 2001, RADIAT PHYS CHEM, V61, P409