Enhancement of ballistic performance enabled by boron-doping in subzero-treated (ferrite plus austenite plus martensite) triplex lightweight steel

被引：6

作者：

Kim, Dae Woong ^{[1
]}

Kim, Selim ^{[2
]}

Yang, Junha ^{[2
]}

Lee, Sunghak ^{[3
]}

Sohn, Seok Su ^{[4
]}

机构：

[1] Res Inst Ind Sci & Technol, Anal & Assessment Grp, Pohang 37673, South Korea

[2] Pohang Univ Sci & Technol, Ctr Adv Aerosp Mat, Pohang 37673, South Korea

[3] Pohang Univ Sci & Technol, Grad Inst Ferrous Technol, Pohang 37673, South Korea

[4] Korea Univ, Dept Mat Sci & Engn, Seoul 02841, South Korea

来源：

MATERIALS CHARACTERIZATION | 2022年 / 190卷

关键词：

Medium-Mn lightweight steel; Ballistic performance; Boron-doping; Adiabatic shear band (ASB); Split Hopkinson pressure bar (SHPB); TRANSFORMATION-INDUCED PLASTICITY; ADIABATIC SHEAR BANDS; HIGH-STRAIN RATE; RETAINED AUSTENITE; PHASE-TRANSFORMATION; TENSILE PROPERTIES; GRAIN-SIZE; FRACTURE; TEMPERATURE; STRENGTH;

D O I：

10.1016/j.matchar.2022.112021

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Investigations of dynamic deformation and ballistic performance of ultra-high-strength lightweight steels for steel armor applications have not been conducted to date. In this study, effects of boron(B)-doping on ballistic performance were explored in subzero-treated Fe-0.3C-9Mn-5Al and Fe-0.3C-9Mn-5Al-0.005B (wt%) lightweight steels in relation to band structures and B segregation. The dynamic deformation and adiabatic shear band (ASB) formation behaviors were examined by a Hopkinson pressure bar (SHPB). The band structure is critical in inhibiting ASB propagation, as it is continuously blocked at tempered-martensite/ferrite boundaries. The crack propagates along the embrittled ASB and penetrates into tempered-martensite/ferrite boundaries, producing delamination of elongated grains in the undoped steel. On the other hand, the delamination does not occur in the B-doped steel because the segregation of solute B at prior austenite grain boundaries enhances the grainboundary cohesion. Thus, the B-doped steel outperforms conventional rolled homogeneous armor steels and the undoped steel as well, providing a significant deal of potential for developing excellent ballistic-performance lightweight steel armors.

引用

页数：12

共 64 条

[1] Effect of high strain rate deformation on the properties of SS304L and SS316LN alloys [J].

Acharya, Saikat ;

Moitra, A. ;

Bysakh, Sandip ;

Nanibabu, M. ;

Krishanan, S. A. ;

Mukhopadhyay, C. K. ;

Rajkumar, K. V. ;

Sasikala, G. ;

Mukhopadhyay, A. ;

Mondal, D. K. ;

Ghosh, K. S. ;

Jha, B. B. ;

Muraleedharan, K. .

MECHANICS OF MATERIALS, 2019, 136

[2] Dynamic mechanical properties and failure characteristics of electron beam melted Ti-6Al-4V under high strain rate impact loadings [J].

Alaghmandfard, R. ;

Dharmendra, C. ;

Odeshi, A. G. ;

Mohammadi, M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 793

[3] Introduction [J].

不详 .

DIABETES CARE, 2015, 38 :S1-S2

[4] PHASE-TRANSFORMATION OF AUSTENITIC STAINLESS-STEELS AS A RESULT OF CATHODIC HYDROGEN CHARGING [J].

BENTLEY, AP ;

SMITH, GC .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (09) :1593-1600

[5] Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content [J].

Cai, Z. H. ;

Ding, H. ;

Misra, R. D. K. ;

Ying, Z. Y. .

ACTA MATERIALIA, 2015, 84 :229-236

[6] Competition between formation of carbides and reversed austenite during tempering of a medium-manganese steel studied by thermodynamic-kinetic simulations and atom probe tomography [J].

da Silva, A. Kwiatkowski ;

Inden, G. ;

Kumar, A. ;

Ponge, D. ;

Gault, B. ;

Raabe, D. .

ACTA MATERIALIA, 2018, 147 :165-175

[7] THE INFLUENCE OF PLATE HARDNESS ON THE BALLISTIC PENETRATION OF THICK STEEL PLATES [J].

DIKSHIT, SN ;

KUTUMBARAO, VV ;

SUNDARARAJAN, G .

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 1995, 16 (02) :293-320

[8] Strain hardening behavior of a TRIP/TWIP steel with 18.8% Mn [J].

Ding, Hao ;

Ding, Hua ;

Song, Dan ;

Tang, Zhengyou ;

Yang, Ping .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03) :868-873

[9] ACOUSTIC-EMISSION INTERPRETATION OF DUCTILE FRACTURE PROCESSES [J].

GERBERICH, WW ;

STOUT, M ;

JATAVALLABHULA, K ;

ATTERIDGE, D .

INTERNATIONAL JOURNAL OF FRACTURE, 1979, 15 (06) :491-514

[10] A NOVEL APPROACH TO TESTING THE DYNAMIC SHEAR RESPONSE OF Ti-6Al-4V [J].

Guo, Yazhou ;

Li, Yulong .

ACTA MECHANICA SOLIDA SINICA, 2012, 25 (03) :299-311

← 1 2 3 4 5 6 7 →