Experimental investigation of heat transfer and pressure drop of turbulent flow inside tube with inserted helical coils

被引:25
|
作者
Sharafeldeen, M. A. [1 ]
Berbish, N. S. [1 ]
Moawed, M. A. [1 ]
Ali, R. K. [1 ]
机构
[1] Benha Univ, Fac Engn Shoubra, Dept Mech Engn, 108 Shoubra St, Cairo 11689, Egypt
关键词
WIRE INSERTS; TRANSFER ENHANCEMENT; EXCHANGER DESIGN; PERFORMANCE; LAMINAR; SURFACES; REGIMES;
D O I
10.1007/s00231-016-1897-z
中图分类号
O414.1 [热力学];
学科分类号
摘要
The heat transfer and pressure drop were experimentally investigated in a coiled wire inserted tube in turbulent flow regime in the range of Reynolds number of 14,400 Re 42,900. The present work aims to extend the experimental data available on wire coil inserts to cover wire diameter ratio of 0.044 e/d 0.133 and coil pitch ratio of 1 p/d 5. Uniform heat flux was applied to the external surface of the tube and air was selected as fluid. The effects of Reynolds number and wire diameter and coil pitch ratios on the Nusselt number and friction factor were studied. The enhancement efficiency and performance criteria ranges are of (46.9-82.6 %) and (100.1-128 %) within the investigated range of the different parameters, respectively. Correlations are obtained for the average Nusselt number and friction factor utilizing the present measurements within the investigated range of geometrical parameters and Re. The maximum deviation between correlated and experimental values for Nusselt number and friction factor are +/- 5 and +/- 6 %, respectively.
引用
收藏
页码:1265 / 1276
页数:12
相关论文
共 50 条
  • [1] Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts
    Vashistha, Chaitanya
    Patil, Anil Kumar
    Kumar, Manoj
    APPLIED THERMAL ENGINEERING, 2016, 96 : 117 - 129
  • [2] Experimental study of heat transfer and friction factor inside elliptic tube fixed with helical coils
    Omara, M. A.
    Abdelatief, Mohamed A.
    APPLIED THERMAL ENGINEERING, 2018, 134 : 407 - 418
  • [3] Turbulent flow and heat transfer of helical coils with twisted section
    Chang, S. W.
    Wu, P. -S.
    Cai, W. L.
    Liu, J. H.
    APPLIED THERMAL ENGINEERING, 2020, 180
  • [4] Investigation friction factor and heat transfer characteristics of turbulent flow inside the corrugated tube inserted with typical and V-cut twisted tapes
    Langeroudi, H. G.
    Javaherdeh, K.
    HEAT AND MASS TRANSFER, 2018, 54 (07) : 1999 - 2008
  • [5] Experimental investigation on heat transfer and pressure drop of internal flow in corrugated tubes
    Andrade, F.
    Moita, A. S.
    Nikulin, A.
    Moreira, A. L. N.
    Santos, H.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 140 : 940 - 955
  • [6] Experimental investigation of shell side heat transfer and pressure drop in a mini-channel shell and tube heat exchanger
    Kucuk, Hasan
    Unverdi, Murat
    Yilmaz, Mehmet Senan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 143
  • [7] The numerical investigation of heat transfer and pressure drop of turbulent flow in a triangular microchannel
    Rezaei, Omid
    Akbari, Omid Ali
    Marzban, Ali
    Toghraie, Davood
    Pourfattah, Farzad
    Mashayekhi, Ramin
    PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, 2017, 93 : 179 - 189
  • [8] Experimental study on heat transfer and pressure drop of nanofluid flow in a horizontal coiled wire inserted tube under constant heat flux
    Saeedinia, M.
    Akhavan-Behabadi, M. A.
    Nasr, M.
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2012, 36 : 158 - 168
  • [9] EXPERIMENTAL STUDY ON TURBULENT HEAT TRANSFER, PRESSURE DROP, AND THERMAL PERFORMANCE OF ZnO/WATER NANOFLUID FLOW IN A CIRCULAR TUBE
    Sajadi, Ahmad Reza
    Sadati, Seyed Soheil
    Nourimotlagh, Masoud
    Pakbaz, Omid
    Ashtiani, Dariush
    Kowsari, Farshad
    THERMAL SCIENCE, 2014, 18 (04): : 1315 - 1326
  • [10] An experimental study on heat transfer and pressure drop of MWCNT-water nano-fluid inside horizontal coiled wire inserted tube
    Akhavan-Behabadi, M. A.
    Shahidi, Mohamad
    Aligoodarz, M. R.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2015, 63 : 62 - 72