Full surface heat transfer characteristics of rotor ventilation duct of a turbine generator

被引:25
|
作者
Yoo, Wonkyung [1 ]
Jeon, Shinyoung [1 ]
Son, Changmin [1 ]
Yang, Jangsik [1 ]
Ahn, Daihyun [2 ]
Kim, Sungha [2 ]
Hwang, Kyeha [2 ]
Ha, Sunghoon [2 ]
机构
[1] Pusan Natl Univ, Sch Mech Engn, Busan 609735, South Korea
[2] Doosan Heavy Ind & Construct, Chang Won 642792, South Korea
关键词
Generator cooling; Rotating duct; High aspect ratio duct; Transient heat transfer test; FLOW; STATOR; GAP;
D O I
10.1016/j.applthermaleng.2015.10.025
中图分类号
O414.1 [热力学];
学科分类号
摘要
The present work reports the investigation on the cooling performance of rotor ventilation duct of turbine generator. An investigation using experimental and analytical approaches was carried out to understand the flow and heat transfer characteristics of a single rotor Ventilation duct. For the investigation, the stationary experiments are carried out for the three different conditions of (1) no cross flow (2) inlet cross flow (3) inlet and outlet cross flow followed by CFD analysis for each case. Transient heat transfer experiment using thermochromic liquid crystal (TLC) technique was carried out for measuring heat transfer characteristics. Furthermore, pressure losses are measured. A series of CFD analysis is carried out for validating modeling approach. The CFD results show good agreement with experimental data. Since the experiments were carried out on the stationary condition, the effect of rotation is examined using validated CFD model. Reynolds number is varied in the range of 13100 similar to 21000. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:385 / 394
页数:10
相关论文
共 50 条
  • [1] Full Surface Heat Transfer Characteristics of Stator Ventilation Duct of a Turbine Generator
    Jeon, Shinyoung
    Son, Changmin
    Yang, Jangsik
    Ha, Sunghoon
    Hwang, Kyeha
    ENERGIES, 2020, 13 (16)
  • [2] Heat transfer coefficient distribution in inner surface of stator ventilation duct for large capacity air-cooled turbine generator
    Su Ying
    Weili Li
    Wenmao Liu
    Yong Li
    Dong Li
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2021, 146 (05) : 2279 - 2289
  • [3] Heat transfer coefficient distribution in inner surface of stator ventilation duct for large capacity air-cooled turbine generator
    Ying Su
    Weili Li
    Wenmao Liu
    Yong Li
    Dong Li
    Journal of Thermal Analysis and Calorimetry, 2021, 146 : 2279 - 2289
  • [4] Heat Transfer Characteristics on the Tip Surface of a High-Turning Turbine Rotor Blade
    Lee, Sang Woo
    Moon, Hyun Suk
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2008, 32 (03) : 207 - 215
  • [5] Research on flow and heat transfer characteristics of heat transfer surface of trapezoidal duct
    Zhang, Yongliang
    Li, Min
    HEAT AND MASS TRANSFER, 2020, 56 (05) : 1475 - 1486
  • [6] Research on flow and heat transfer characteristics of heat transfer surface of trapezoidal duct
    Yongliang Zhang
    Min Li
    Heat and Mass Transfer, 2020, 56 : 1475 - 1486
  • [7] FLOW AND HEAT-TRANSFER IN WATER-COOLED ROTOR WINDING OF A TURBINE GENERATOR
    NAKAYAMA, W
    FUZIOKA, K
    WATANABE, S
    IEEE TRANSACTIONS ON POWER APPARATUS AND SYSTEMS, 1978, 97 (01): : 225 - 231
  • [8] EXPERIMENTAL STUDY OF HEAT TRANSFER AT THE SURFACE OF TURBINE ROTOR BLADES.
    Pochuev, V.P.
    Shcherbakov, V.F.
    Soviet Aeronautics (English translation of Izvestiya VUZ, Aviatsionnaya Tekhnika), 1981, 24 (01): : 32 - 35
  • [9] Analysis of hydro-generator rotor coupling field on rotor ventilation duct blocked
    Li W.-L.
    Li D.
    Li J.-Y.
    Li, Dan, 1600, Editorial Department of Electric Machines and Control (21): : 30 - 38
  • [10] Experimental Research on Heat Transfer Characteristics of Turbine Blade Surface
    Xuan W.-T.
    Zhong B.
    Wei J.-T.
    Gu H.
    Guo H.-Y.
    Yang W.-H.
    Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (07):