Thermal-mechanical fatigue behavior of a cast K417 nickel-based superalloy

被引:35
作者
Liu, F [1 ]
Ai, SH [1 ]
Wang, YC [1 ]
Zhang, H [1 ]
Wang, ZG [1 ]
机构
[1] Chinese Acad Sci, Inst Met Res, ShenYang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
关键词
superalloy; thermal-mechanical fatigue; flow stress; fatigue life;
D O I
10.1016/S0142-1123(02)00010-5
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The thermal-mechanical fatigue (TMF) behavior of cast K417 nickel-based superalloy was investigated under in-phase (IP) and out-of-phase (OP) loading in the temperature range from 400 to 850degreesC. The results revealed that the tendency to cyclic hardening Under thermal-mechanical and isothermal fatigue was higher than that Under static tensile testing at 850degreesC. Isothermal fatigue (IF) was observed to cause higher cyclic flow stress than TMF. At a corresponding strain amplitude, the thermal-mechanical fatigue life was lower than that of isothermal fatigue, and the TMF life of out-of-phase cycling was higher than that of in-phase cycling Scanning electron microscopic observations of fracture surfaces and longitudinal sections revealed intergranular-fatigue under in-phase TMF which led to the decrease in fatigue life. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:841 / 846
页数:6
相关论文
共 12 条
[1]  
Antolivich SD, 1981, METALL T A, V12, P437
[2]  
BARMGARTNER T, 1990, FAT 90 P 4 INT C FAT, V3, P1699
[3]  
CHEN LJ, 1998, THESIS STATE KEY LAB
[4]  
GUEDOU JY, 1993, ASTM STP, V1186, P157
[5]  
Henderson PJ, 1996, SER METAL MAT, V24, P1839
[6]   Thermomechanical and isothermal fatigue behavior of bare and coated superalloys [J].
Kadioglu, Y ;
Sehitoglu, H .
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (01) :94-102
[7]  
Marchionni M., 1993, FAT 93 P 5 INT C FAT, V2, P933
[8]  
MARDHAND N, 1988, ASTM STP, V942, P638
[9]   EXPERIMENTAL AND THEORETICAL INVESTIGATIONS ON MORPHOLOGICAL-CHANGES OF GAMMA-' PRECIPITATES IN NI-AL SINGLE-CRYSTALS DURING UNIAXIAL STRESS-ANNEALING [J].
MIYAZAKI, T ;
NAKAMURA, K ;
MORI, H .
JOURNAL OF MATERIALS SCIENCE, 1979, 14 (08) :1827-1837
[10]  
OSTERGREN WJ, 1976, J TEST EVAL, V4, P327, DOI 10.1520/JTE10520J