A Clean Process for Obtaining High-Quality Cellulose Acetate from Cigarette Butts

The main purpose of this study is to introduce a modified method for recovering and recycling huge number of cigarette butts (CBs) and convert them into a fashion product. CBs are non-biodegradable waste, generally, discarded improperly into the environment. CBs consist of cellulose acetate, which can be recovered through extraction and purification processes. CBs are the most numerically frequent form of waste in the world. A relevant portion of CBS are discarded improperly into the environment. The principal filter components are plasticized cellulose acetate fibers that have the slowest degradation rate (up to years). In fact, a limiting step is the hydrolysis of cellulose acetate polymer into cellulose and acetic acid, which is extremely slow under ambient conditions and represents a relevant environmental risk. A number of studies have been realized on recycling cigarette butts with encouraging results, and several methods have been studied, including recycling of cigarette butts in asphalt concrete and fired clay bricks, as a carbon source, sound-absorbing material, corrosion inhibitor, biofilm carrier, and many more. In this study, we propose a novel, green, low cost, simple, and efficient extraction method of cellulose acetate fibers (CA) from discarded cigarette butts (DCBs). CBs extraction procedure involves a two-step process consisting of washings in water and some subsequent washings in ethanol. The obtained samples of CA are dried at 60 degrees C for 60 min in the oven. The quality and properties of cellulose acetate extracted and purified are comparable to the pure cellulose acetate fiber used for cigarette butts. The preliminary results obtained on the recovered CA look promising to the use of this recovery material from cigarette butts to obtain a wide consumption fashion product, such as eyeglass frames.