Investigating direction characteristics of the heat transfer coefficient in forced convection reflow oven

被引：31

作者：

Illes, Balazs ^{[1
]}

Harsanyi, Gabor ^{[1
]}

机构：

[1] Budapest Univ Technol & Econ, Dept Elect Technol, H-1111 Budapest, Hungary

来源：

EXPERIMENTAL THERMAL AND FLUID SCIENCE | 2009年 / 33卷 / 04期

关键词：

Heat transfer coefficient; Forced convection; Reflow oven; Soldering; NATURAL-CONVECTION;

D O I：

10.1016/j.expthermflusci.2009.01.001

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In this paper, we investigate the heating capability of forced convection reflow ovens and the effect of the ovens' construction on it. This parameter depends on the heat transfer coefficient (a) which is mainly determined by the gas flow parameters. First of all we studied the gas flow circumstances in the reflow oven using a stationary and isothermal gas flow model. The conclusions of the model are then proved by experimental results as well. Our experiments were based on measuring the temperature changes on different points which are located around the centre of the ovens' processing area. From these data, direction characteristics of alpha were calculated using the heat equation of the investigated reflow oven. Our results are important for effective thermal modelling of the reflow soldering process [B. IIIes, G. Harsanyi, 3D thermal model to investigate component displacement phenomenon during reflow soldering, Microelectronics Reliability 48 (2008) 1062-1068] and are useful to calibrate reflow ovens. In this project we examined the latest reflow ovens constructed with nozzle-matrix blower system. (C) 2009 Elsevier Inc. All rights reserved.

引用

页码：642 / 650

页数：9

共 24 条

[1]

[Anonymous], MICROELECTRON RELIAB

[2]

Belov I., 2007, IEEE P EUROSIME C LO, P1, DOI DOI 10.1109/ESIME.2007.359951

[3] Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins [J].

Castell, Albert ;

Sole, Cristian ;

Medrano, Marc ;

Roca, Joan ;

Cabeza, Luisa F. ;

Garcia, Daniel .

APPLIED THERMAL ENGINEERING, 2008, 28 (13) :1676-1686

[4] A review on simultaneous determination of thermal diffusivity and heat transfer coefficient [J].

Erdogdu, Ferruh .

JOURNAL OF FOOD ENGINEERING, 2008, 86 (03) :453-459

[5] Prediction of electronic component-board transient conjugate heat transfer [J].

Eveloy, V ;

Rodgers, P .

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2005, 28 (04) :817-829

[6] Application of numerical analysis to the optimisation of electronic component reliability screening and assembly processes [J].

Eveloy, V ;

Rodgers, P ;

Hashmi, MSJ .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 (1-3) :1788-1796

[7] An active coolant cooling system for applications in surface grinding [J].

Gao, Y ;

Tse, S ;

Mak, H .

APPLIED THERMAL ENGINEERING, 2003, 23 (05) :523-537

[8]

ILLES B, 2006, IEEE P 29 INT SPRING, P80

[9]

ILLES B, 2007, P 13 SIITME C BIA MA, P27

[10] 3D thermal model to investigate component displacement phenomenon during reflow soldering [J].

Illes, Balazs ;

Harsanyi, Gabor .

MICROELECTRONICS RELIABILITY, 2008, 48 (07) :1062-1068

← 1 2 3 →