Solidification cracking susceptibility of ferritic stainless steels using Modified Varestraint Transvarestraint (MVT) method

被引：2
|
作者：
Konadu, D. S. [1 ,2 ]
Pistorius, P. G. H. [1 ]
Du Toit, M. [3 ]
Griesche, Axel [4 ]
机构：
[1] Univ Pretoria, Dept Mat Sci & Met Engn, ZA-0002 Pretoria, South Africa
[2] Univ Ghana, Dept Mat Sci & Engn, POB LG 77, Accra, Ghana
[3] Univ Wollongong, Sch Mech Mat Mechatron & Biomed Engn, Wollongong, NSW, Australia
[4] Fed Inst Mat Res & Testing, Bundesanstalt Materialforsch & Prufung BAM, Berlin, Germany
来源：
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES | 2019年 / 44卷 / 09期
关键词：
Modified Varestraint Transvarestraint; solidification cracking; ferritic stainless steel; microstructure; welding; susceptibility;
D O I：
10.1007/s12046-019-1175-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Modified Varestraint Transvarestraint (MVT) test was used to investigate the solidification cracking susceptibility of an unstabilised, a Nb-stabilised and two (Ti + Nb) dual-stabilised ferritic stainless steels. Two different welding speeds of 6 and 3 mm/s using autogenous gas tungsten arc welding were employed. At the welding speed of 6 mm/s, the high-content (Ti + Nb) steel was resistant and the Nb-stabilised steel was marginally susceptible to solidification cracking. At the welding speed of 3 mm/s, the Nb and the high (Ti + Nb) steels were found to be marginally susceptible to solidification cracking while the unstabilised and low-content (Ti + Nb) grades were resistant to solidification cracking. The weld metal microstructures transverse to the welding direction revealed columnar grains in all the samples for both welding speeds. The ferritic stainless steels were generally resistant to solidification cracking, except the Nb-stabilised steel, which was marginally susceptible to solidification cracking.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Investigation of formation of precipitates and solidification temperatures of ferritic stainless steels using differential scanning calorimetry and Thermo-Calc simulation
    David Sasu Konadu
    Pieter Georg Hendrik Pistorius
    Sādhanā, 2021, 46
  • [42] Relationship between Alloy Element and Weld Solidification Cracking Susceptibility of Austenitic Stainless Steel
    Ueda, Seidai
    Kadoi, Kota
    Tokita, Shun
    Inoue, Hiroshige
    ISIJ INTERNATIONAL, 2019, 59 (07) : 1323 - 1329
  • [43] Hot cracking behaviour and susceptibility of extra high purity type 310 stainless steels
    Saida, K.
    Okabe, Y.
    Hata, K.
    Nishimoto, K.
    Kiuchi, K.
    Nakayama, J.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2010, 15 (01) : 87 - 96
  • [44] Evaluation of solidification cracking susceptibility during laser welding in advanced high strength automotive steels
    Agarwal, G.
    Kumar, A.
    Richardson, I. M.
    Hermans, M. J. M.
    MATERIALS & DESIGN, 2019, 183
  • [45] Solidification Cracking Susceptibility of Alloy 52 Weld Overlay on 316L Stainless Steel
    Chung, W. C.
    Tsay, L. W.
    Chen, C.
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2, 2012, 704-705 : 529 - +
  • [46] Microstructural evolution and solidification cracking susceptibility of grain boundary engineered fully austenitic stainless steel
    Tokita, Shun
    Kadoi, Kota
    Kanno, Yudai
    Inoue, Hiroshige
    WELDING IN THE WORLD, 2020, 64 (04) : 593 - 600
  • [47] Microstructural evolution and solidification cracking susceptibility of grain boundary engineered fully austenitic stainless steel
    Shun Tokita
    Kota Kadoi
    Yudai Kanno
    Hiroshige Inoue
    Welding in the World, 2020, 64 : 593 - 600
  • [48] Effect of C and Mn Variations Upon the Solidification Mode and Surface Cracking Susceptibility of Peritectic Steels
    Alfaro Lopez, Eddy
    Herrera Trejo, Martin
    Ruiz Mondragon, Jose Jorge
    Castro Roman, Manuel de Jesus
    Solis Tovar, Hugo
    ISIJ INTERNATIONAL, 2009, 49 (06) : 851 - 858
  • [49] Evaluation of solidification cracking susceptibility in laser welds for type 316FR stainless steel
    Eun-Joon Chun
    Kazutoshi Nishimoto
    Kazuyoshi Saida
    Welding in the World, 2016, 60 : 217 - 231
  • [50] Evaluation of solidification cracking susceptibility in laser welds for type 316FR stainless steel
    Chun, Eun-Joon
    Nishimoto, Kazutoshi
    Saida, Kazuyoshi
    WELDING IN THE WORLD, 2016, 60 (02) : 217 - 231
12345