Microstructure and properties of Fe-Al intermetallic coatings on the low carbon steel synthesized by mechanical alloying

被引：25

作者：

Canakci, A. ^{[1
]}

Varol, T. ^{[1
]}

Erdemir, F. ^{[1
]}

Ozkaya, S. ^{[1
]}

Mindivan, H. ^{[2
]}

机构：

[1] Karadeniz Tech Univ, Fac Engn, Dept Met & Mat Engn, Trabzon, Turkey

[2] Bilecik Seyh Edebali Univ, Dept Mech & Mfg Engn, Bilecik, Turkey

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2014年 / 73卷 / 5-8期

关键词：

Fe-Al coatings; Wear; Mechanical alloying; Corrosion; PARTICLE-SIZE; TEMPERATURE; POWDER;

D O I：

10.1007/s00170-014-5851-2

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Fe-Al coating was obtained on low carbon steel substrates using mechanical alloying and subsequent heat treatment. Light optical microscopy and a scanning electron microscope equipped with energy dispersive spectroscopy were used to conduct the microstructure characterization. Mechanical properties of the coatings were evaluated by microhardness measurements and wear tests. The corrosion behavior was determined by potentiodynamic polarization measurements in 3.5 % NaCl solution. The results of the mechanical and corrosion tests showed that the hardness and wear resistance of the coatings decreased with increasing the milling time, while increase in the milling time resulted in a significant increase in the thickness, porosity level, and corrosion resistance.

引用

页码：849 / 858

页数：10

共 26 条

[1] Effects of amount of methanol on characteristics of mechanically alloyed Al-Al2O3 composite powders [J].

Canakci, A. ;

Varol, T. ;

Nazik, C. .

MATERIALS TECHNOLOGY, 2012, 27 (04) :320-327

[2] Analysis of the effect of a new process control agent technique on the mechanical milling process using a neural network model: Measurement and modeling [J].

Canakci, Aykut ;

Varol, Temel ;

Ozsahin, Sukru .

MEASUREMENT, 2013, 46 (06) :1818-1827

[3] Evaluation of Nanostructured coating layers formed on Ni balls during mechanical alloying of Cu powder [J].

Farahbakhsh, Iman ;

Zakeri, Alireza ;

Manikandan, Palavesamuthu ;

Hokamoto, Kazuyuki .

APPLIED SURFACE SCIENCE, 2011, 257 (07) :2830-2837

[4] In situ nanocrystalline Fe-Si coating by mechanical alloying [J].

Gupta, G. ;

Mondal, K. ;

Balasubramaniam, R. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 482 (1-2) :118-122

[5] Influence of iron powder particle size on the microstructure and properties of Fe3Al intermetallics prepared by mechanical alloying and spark plasma sintering [J].

He, Qing ;

Ha, Chengchang ;

Meng, He .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 428 (1-2) :314-318

[6]

Jiang J, 2011, J ALLOY COMPD, V509, P507

[7] Preparation of Fe2B boride coating on low-carbon steel surfaces and its evaluation of hardness and corrosion resistance [J].

Jiang, Jibo ;

Wang, Yi ;

Zhong, Qingdong ;

Zhou, Qiongyu ;

Zhang, Lei .

SURFACE & COATINGS TECHNOLOGY, 2011, 206 (2-3) :473-478

[8] Mechanical-dry coating of wax onto copper powder by ball milling [J].

Kim, J ;

Satoh, M ;

Iwasaki, T .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 342 (1-2) :258-263

[9] Mechanical matching and microstructural evolution at the coating/substrate interfaces of cold-sprayed Ni, Al coatings [J].

Lee, H. ;

Lee, S. ;

Shin, H. ;

Ko, K. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 478 (1-2) :636-641

[10] Preparation of Ti-Cr and Ti-Cu flame-retardant coatings on Ti-6Al-4V using a high-energy mechanical alloying method: A preliminary research [J].

Li, Bo ;

Ding, Rundong ;

Shen, Yifu ;

Hu, Yongzhi ;

Guo, Yan .

MATERIALS & DESIGN, 2012, 35 :25-36

← 1 2 3 →