Yield anisotropy effects on buckling of circular tubes under bending

被引:95
作者
Corona, E.
Lee, L-H.
Kyriakides, S.
机构
[1] Univ Notre Dame, Dept Aerosp & Mech Engn, Notre Dame, IN 46556 USA
[2] Univ Texas, Res Ctr Mech Solids Struct & Mat, Austin, TX 78712 USA
关键词
buckling; bending; tubes; collapse; plasticity; anisotropy;
D O I
10.1016/j.ijsolstr.2006.03.005
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Relatively thin-walled tubes bent into the plastic range buckle by axial wrinkling. The wrinkles initially grow stably but eventually localize and cause catastrophic failure in the form of sharp local kinking. The onset of axial wrinkling was previously established by bifurcation analyses that use instantaneous deformation theory moduli. The curvatures at bifurcation were predicted accurately, but the wrinkle wavelengths were consistently longer than measured values. The subject is revisited with the aim of resolving this discrepancy. A set of new bending experiments is conducted on aluminum alloy tubes. The results are shown to be in line with previous ones. However, the tubes used were found to exhibit plastic anisotropy, which was measured and characterized through Hill's quadratic anisotropic yield function. The anisotropy was incorporated in the flow theory used for prebuckling and postbuckling calculations as well as in the deformation theory used for bifurcation checks. With the anisotropy accounted for, calculated tube responses are found to be in excellent agreement with the measured ones while the predicted bifurcation curvatures and wrinkle wavelengths fall in line with the measurements also. The postbuckling response is established using a finite element model of a tube assigned an initial axisymmetric imperfection with the calculated wavelength. The response develops a limit moment that is followed by a sharp kink that grows while the overall moment drops. The curvature at the limit moment agrees well with the experimental onset of failure. From parametric studies of the various instabilities it is concluded that, for optimum predictions, anisotropy must be incorporated in both bifurcation buckling as well as in postbuckling calculations. (c) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码:7099 / 7118
页数:20
相关论文
共 50 条
[41]   Buckling of dented bi-material pipe under bending Part I: Experiments and simulation [J].
Yuan, Lin ;
Zhou, Jiasheng ;
Liu, Haowei ;
Chen, Nian-Zhong .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2022, 257
[42]   Buckling failure of 310 stainless steel tubes with different diameter-to-thickness ratios under cyclic bending [J].
Chang, Kao-Hua ;
Lee, Kuo-Long ;
Pan, Wen-Fung .
STEEL AND COMPOSITE STRUCTURES, 2010, 10 (03) :245-260
[43]   Buckling of flat plates under bending and shear [J].
Featherston, CA ;
Ruiz, C .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1998, 212 (04) :249-261
[44]   Effects of elastic medium on buckling of microtubules due to bending and torsion [J].
Taj, Muhammad ;
Hussain, Muzamal ;
Afsar, Muhammad A. ;
Safeer, Muhammad ;
Ahmad, Manzoor ;
Naeem, Muhammad N. ;
Badshah, Noor ;
Khan, Arshad ;
Tounsi, Abdelouahed .
ADVANCES IN CONCRETE CONSTRUCTION, 2020, 9 (05) :491-501
[45]   Solid or shell finite elements to model thick cylindrical tubes and shells under global bending [J].
Sadowski, Adam J. ;
Rotter, J. Michael .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2013, 74 :143-153
[46]   Bending Characteristics of Folded Multi-celled Tubes with Square and Circular Section Geometries [J].
Liang, Rui ;
Xu, Fengxiang ;
Zou, Zhen ;
Niu, Xiaoqiang ;
Tang, Xuebang ;
Li, Tingpeng .
ACTA MECHANICA SOLIDA SINICA, 2025, 38 (01) :125-141
[47]   Experiments on Dented Steel Tubes under Bending [J].
Ghazijahani, Tohid Ghanbari ;
Jiao, Hui ;
Holloway, Damien .
ADVANCES IN STRUCTURAL ENGINEERING, 2015, 18 (11) :1807-1817
[48]   Buckling of circular cylindrical shell under beam-like bending (1st report) experiment [J].
Otsuka, H ;
Koga, T .
TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 1998, 41 (131) :38-45
[49]   Effects of tension/compression asymmetry on the buckling and recovery of NiTi tubes under axial compression [J].
Jiang, Dongjie ;
Landis, Chad M. ;
Kyriakides, Stelios .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2016, 100 :41-53
[50]   The Effect of Displacement Field on Bending, Buckling, and Vibration of Cross-Ply Circular Cylindrical Shells [J].
Shadmehri, Farjad ;
Hoa, Suong ;
Hojjati, Mehdi .
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2014, 21 (01) :14-22