Numerical analysis of the Edge Crack Torsion test for mode III interlaminar fracture of composite laminates

被引：33

作者：

de Moura, M. F. S. F. ^{[1
]}

Fernandez, M. V. C. ^{[1
]}

de Morais, A. B. ^{[2
]}

Campilho, R. D. S. G. ^{[1
]}

机构：

[1] Univ Porto, Fac Engn, Dept Mech Engn & Ind Management, P-4200465 Oporto, Portugal

[2] Univ Aveiro, Dept Mech Engn, P-3810193 Aveiro, Portugal

来源：

ENGINEERING FRACTURE MECHANICS | 2009年 / 76卷 / 04期

关键词：

Composites; Cohesive zone modelling; Delamination; Damage tolerance; Mode III fracture characterization; ECT TEST; TOUGHNESS; DELAMINATION; SPECIMEN; BEHAVIOR; DESIGN; ENF;

D O I：

10.1016/j.engfracmech.2008.10.004

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

A detailed numerical analysis of the Edge Crack Torsion test was performed to verify its adequacy for the mode III interlaminar fracture characterization of composite laminates. A new data reduction scheme based on specimen compliance was proposed. Three-dimensional finite element analyses including a cohesive damage model were performed in order to evaluate the accuracy of perceived G(IIIc) values obtained with the proposed method. Despite some degree of crack length dependency of perceived G(IIIc) acceptable errors could be achieved within a certain crack length range, which is thus recommended for experimental tests. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：469 / 478

页数：10

共 22 条

[1]

[Anonymous], 2000, ASTM STP

[2] DESIGN AND ANALYSIS OF THE CRACK RAIL SHEAR SPECIMEN FOR MODE-III INTERLAMINAR FRACTURE [J].

BECHT, G ;

GILLESPIE, JW .

COMPOSITES SCIENCE AND TECHNOLOGY, 1988, 31 (02) :143-157

[3] ON THE ANALYSIS AND DESIGN OF THE END NOTCHED FLEXURE (ENF) SPECIMEN FOR MODE-II TESTING [J].

CARLSSON, LA ;

GILLESPIE, JW ;

PIPES, RB .

JOURNAL OF COMPOSITE MATERIALS, 1986, 20 (06) :594-604

[4] Mixed mode II+III interlaminar fracture of carbon/epoxy laminates [J].

de Morais, A. B. ;

Pereira, A. B. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (09) :2022-2027

[5] Application of the effective crack method to mode I and mode II interlaminar fracture of carbon/epoxy unidirectional laminates [J].

de Morais, A. B. ;

Pereira, A. B. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (03) :785-794

[6] Equivalent crack based analyses of ENF and ELS tests [J].

de Moura, M. F. S. F. ;

de Morais, A. B. .

ENGINEERING FRACTURE MECHANICS, 2008, 75 (09) :2584-2596

[7] Equivalent crack based mode II fracture characterization of wood [J].

de Moura, MFSF ;

Silva, MAL ;

de Morais, AB ;

Morais, JJL .

ENGINEERING FRACTURE MECHANICS, 2006, 73 (08) :978-993

[8] Prediction of compressive strength of carbon-epoxy laminates containing delamination by using a mixed-mode damage model [J].

de Moura, MFSF ;

Gonçalves, JPM ;

Marques, AT ;

de Castro, PMST .

COMPOSITE STRUCTURES, 2000, 50 (02) :151-157

[9] MODE-III INTERLAMINAR FRACTURE CHARACTERIZATION OF COMPOSITE-MATERIALS [J].

DONALDSON, SL .

COMPOSITES SCIENCE AND TECHNOLOGY, 1988, 32 (03) :225-249

[10] Investigation of mode III fracture toughness using an anti-clastic plate bending method [J].

Farshad, M ;

Flueler, P .

ENGINEERING FRACTURE MECHANICS, 1998, 60 (5-6) :597-603

← 1 2 3 →