Study on thermal insulation performance of EVA foaming materials

被引:6
作者
Gong, Wei [1 ,2 ]
Ma, Yu Long [1 ,2 ]
Fu, Hai [1 ]
Ban, Da Ming [1 ]
He, Li [2 ]
Yin, Xiao Gang [1 ]
机构
[1] Guizhou Normal Univ, Coll Mat & Architectural Engn, Guiyang, Guizhou, Peoples R China
[2] Natl Engn Res Ctr Compounding & Modificat Polymer, Guiyang, Guizhou, Peoples R China
关键词
EVA; foaming; cell structure; thermal conductivity;
D O I
10.1080/00150193.2018.1450044
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Foaming EVA was prepared with molding method in this paper, the effect of the cell size, cell wall thickness and filling gas type on thermal insulation performance of foaming EVA were analysed by the mechanism of insulation. The results show that the cell size, cell wall thickness and filling gas type have a significant influences on the insulation performance. When the cell size is 71.3m, the thermal conductivity is the smallest at low frequency 1000Hz, which is 0.042W/ (m.k). When the cell wall thickness is 8.2m, thermal conductivity of foaming EVA is minimal, which is 0.045W / (m.K), the insulation effect is ideal. When the filling gas is hydrogen, the thermal insulation performance of foaming EVA is poor, but when the filling gas is nitrogen, the result is opposite.
引用
收藏
页码:16 / 24
页数:9
相关论文
共 17 条
[1]   Performance characteristics and practical applications of common building thermal insulation materials [J].
Al-Homoud, MS .
BUILDING AND ENVIRONMENT, 2005, 40 (03) :353-366
[2]  
Allard J. F., 2009, PROPAG SOUND POROUS
[3]   Acoustic absorption coefficient of open-cell polyolefin-based foams [J].
Alvarez-Lainez, Monica ;
Angel Rodriguez-Perez, Miguel ;
Antonio de Saja, Jose .
MATERIALS LETTERS, 2014, 121 :26-30
[4]  
Badiee A., 2015, THESIS
[5]  
Barrios M, 2011, THESIS
[6]   Development of thermal insulating and sound absorbing agro-sourced materials from auto linked flax-tows [J].
El Hajj, Nemr ;
Mboumba-Mamboundou, Brice ;
Dheilly, Rose-Marie ;
Aboura, Zoheir ;
Benzeggagh, Malek ;
Queneudec, Michele .
INDUSTRIAL CROPS AND PRODUCTS, 2011, 34 (01) :921-928
[7]   Polymer nano-foams for insulating applications prepared from CO2 foaming [J].
Forest, C. ;
Chaumont, P. ;
Cassagnau, P. ;
Swoboda, B. ;
Sonntag, P. .
PROGRESS IN POLYMER SCIENCE, 2015, 41 :122-145
[8]   Morphology, mechanical, and rheological behavior of microcellular injection molded EVA-clay nanocomposites [J].
Hwang, Shyh-shin ;
Liu, Sung-po ;
Hsu, Peming P. ;
Yeh, Jui-ming ;
Yang, Jui-pin ;
Chen, Chiu-lin .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2012, 39 (03) :383-389
[9]  
Long L., 2016, SCI REP, V6
[10]  
Luai, 2002, STUD PREP STRUCT PRO, P59