Influence of temperature on the low cycle fatigue behaviour of a modified 9Cr-1Mo ferritic steel

被引:157
作者
Nagesha, A [1 ]
Valsan, M [1 ]
Kannan, R [1 ]
Rao, KBS [1 ]
Mannan, SL [1 ]
机构
[1] Indira Gandhi Ctr Atom Res, Mat Dev Grp, Kalpakkam 603102, Tamil Nadu, India
关键词
low cycle fatigue; modified 9Cr-1Mo steel; dynamic strain ageing; oxidation;
D O I
10.1016/S0142-1123(02)00035-X
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Low cycle fatigue (LCF) behaviour of a modified 9Cr-1Mo steel under normalized and tempered conditions is reported. The alloy was normalized at 1313K for I h followed by tempering at 1033K for I h, which resulted in a tempered martensitic structure. Total axial strain controlled LCF tests were conducted at a constant strain rate of 3x10(3) s(-1) at different strain amplitudes varying from +/-0.25 to +/-1.0% in the temperature range of 300-873K. The cyclic stress response behaviour, in general, showed an initial brief hardening for the first few cycles, followed by a continuous and gradual softening regime that ended in a stress plateau that continued up to the specimen failure. The fatigue life decreased as the temperature increased. The temperature effect on life was more pronounced at low strain amplitudes. The metallography of the failed samples revealed that the fatigue failure at high amplitudes of testing was marked by extensive crack branching and the formation of secondary cracks. Oxidation was found to exert major influence on LCF life reduction at 873K. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1285 / 1293
页数:9
相关论文
共 24 条
[1]   CREEP-FATIGUE EVALUATION OF NORMALIZED AND TEMPERED MODIFIED 9CR-1MO [J].
AOTO, K ;
KOMINE, R ;
UENO, F ;
KAWASAKI, H ;
WADA, Y .
NUCLEAR ENGINEERING AND DESIGN, 1994, 153 (01) :97-110
[2]   EXPLORATORY RESEARCH ON CREEP AND FATIGUE PROPERTIES OF 9CR-STEELS FOR THE STEAM-GENERATOR OF AN FBR [J].
ASADA, Y ;
DOZAKI, K ;
UETA, M ;
ICHIMIYA, M ;
MORI, K ;
TAGUCHI, K ;
KITAGAWA, M ;
NISHIDA, T ;
SAKON, T ;
SUKEKAWA, M .
NUCLEAR ENGINEERING AND DESIGN, 1993, 139 (03) :269-275
[3]  
Basquin O.H., 1910, P ASTM, V10, P625, DOI DOI 10.4236/MSA.2011.212231
[4]  
Bhanu Sankara Rao K., 1986, High Temp. Mater. Process., V7, P171
[5]  
CHOULOT JJ, 1991, ARCH FR PEDIATR, V48, P267
[6]  
Coffin L.F., 1954, T AM SOC MECH ENG, V76, P931, DOI [10.1115/1.4015020, DOI 10.1115/1.4015020]
[7]   EFFECT OF PROCESSING ON THE HIGH-TEMPERATURE LOW-CYCLE FATIGUE PROPERTIES OF MODIFIED 9CR-1MO FERRITIC STEEL [J].
EBI, G ;
MCEVILY, AJ .
FATIGUE OF ENGINEERING MATERIALS AND STRUCTURES, 1984, 7 (04) :299-314
[8]  
GIESEKE BG, 1993, MICROSTRUCTURE MECH, P197
[9]   SURFACE OXIDE FILM SOFTENING IN A FERRITIC STEEL AT ELEVATED-TEMPERATURE [J].
HOLLAR, J ;
WEERTMAN, JR .
SCRIPTA METALLURGICA, 1987, 21 (11) :1577-1580
[10]  
Jones W.B., 1981, P ASM INT C PROD FAB, P221