Application of multilayer coatings to replicated substrates

We are engaged in a program to develop focussing hard X-ray telescopes in a double conical or Welter 1 geometry that function up to 100 keV by employing small graze angles and multilayer coatings. Directly polished substrates are not an option because they are too thick to be nested efficiently. The only alternative is to fabricate the very thin substrates by replication. Our objective is the production of integral cylindrical substrates because they should result in better angular resolution than segmented foil geometries. In addition, integral cylinders would be mure resistant to possible stress from deep multilayer coatings than segmented ones. Both electroforming of nickel (method of SAX, JE:T-X, and XMM) and epoxy replication are under consideration. Both processes can utilize the same types of mandrels and separation agents. While electroforming can produce substrates that are thin, the high density of the nickel may result in high weight optics for some missions. For convenience, experimentation with replication and coating is being carried out initially on fiats. Our replication studies include trials with gold and carbon separation agents. This paper reports on our efforts with epoxy replicated optics.