Electroless Deposition of Cu/Multiwalled Carbon Nanotube Composite Films with Improved Frictional Properties

被引：5

作者：

Arai, Susumu ^{[1
]}

Kanazawa, Taishi ^{[1
]}

机构：

[1] Shinshu Univ, Fac Engn, Dept Chem & Mat Engn, Nagano 3808553, Japan

来源：

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY | 2014年 / 3卷 / 06期

关键词：

COPPER MATRIX COMPOSITES; WEAR PROPERTIES; BEHAVIOR;

D O I：

10.1149/2.018406jss

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Composite films containing copper and multiwalled carbon nanotubes (MWCNTs) with different dimensions were fabricated by electroless deposition and their microstructure and frictional properties were evaluated. The films were formed using an electroless copper plating bath including dispersants of sodium lauryl sulfate and hydroxypropyl cellulose for MWCNTs. The microstructure of the films was characterized by scanning electron microscopy and X-ray diffraction, and their frictional properties were investigated using a ball-on-disk method without a lubricant. All of the deposited films contained uniformly dispersed MWCNTs, and exhibited significantly lower coefficients of friction than copper films. (C) 2014 The Electrochemical Society. All rights reserved.

引用

页码：P201 / P206

页数：6

共 18 条

[1] Mechanism for Codeposition of Multiwalled Carbon Nanotubes with Copper from Acid Copper Sulfate Bath [J].

Arai, Susumu ;

Kato, Akihiro .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2013, 160 (09) :D380-D385

[2] Effects of Additives on Cu-MWCNT Composite Plating Films [J].

Arai, Susumu ;

Saito, Takashi ;

Endo, Morinobu .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2010, 157 (03) :D127-D134

[3] Cu-MWCNT Composite Films Fabricated by Electrodeposition [J].

Arai, Susumu ;

Saito, Takashi ;

Endo, Morinobu .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2010, 157 (03) :D147-D153

[4] Frictional anisotropy of oriented carbon nanotube surfaces [J].

Dickrell, PL ;

Sinnott, SB ;

Hahn, DW ;

Raravikar, NR ;

Schadler, LS ;

Ajayan, PM ;

Sawyer, WG .

TRIBOLOGY LETTERS, 2005, 18 (01) :59-62

[5] The preparation of carbon nanotube (CNT)/copper composites and the effect of the number of CNT walls on their hardness, friction and wear properties [J].

Guiderdoni, Ch. ;

Pavlenko, E. ;

Turq, V. ;

Weibel, A. ;

Puech, P. ;

Estournes, C. ;

Peigney, A. ;

Bacsa, W. ;

Laurent, Ch. .

CARBON, 2013, 58 :185-197

[6] Effect of thermal cycling on the microstructure of continuous carbon fibre reinforced copper matrix composites [J].

Koráb, J ;

Korb, G ;

Stefánik, P ;

Degischer, HP .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1999, 30 (08) :1023-1026

[7] Highly wear-resistant composites based on copper powder mixture with onion carbon nanostructures for self-lubricating friction units [J].

Kovtun, V. A. ;

Pasovets, V. N. ;

Mikhovsky, M. ;

Kharlamov, A. I. .

JOURNAL OF FRICTION AND WEAR, 2010, 31 (02) :128-132

[8] THERMAL-CONDUCTIVITY, ELECTRICAL-CONDUCTIVITY AND SPECIFIC-HEAT OF COPPER-CARBON FIBER COMPOSITES [J].

KUNIYA, K ;

ARAKAWA, H ;

KANAI, T ;

CHIBA, A .

TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1987, 28 (10) :819-826

[9] Manufacturing and tribological properties of copper matrix/carbon nanotubes composites [J].

Lin, C. B. ;

Chang, Zue-Chin ;

Tung, Y. H. ;

Ko, Yuan-Yuan .

WEAR, 2011, 270 (5-6) :382-394

[10] Thermal cycling induced deformation and damage in carbon fiber reinforced copper composite [J].

Lin, MH ;

Buchgraber, W ;

Korb, G ;

Kao, PW .

SCRIPTA MATERIALIA, 2002, 46 (02) :169-173

← 1 2 →