The Influence of Gamma Radiation on Electrical Behaviour of Isotactic Polypropylene

被引:0
|
作者
Mouaci, S. [1 ]
Belkahla, N. [1 ]
Saidi-Amroun, N. [1 ]
Saidi, M. [1 ]
机构
[1] Univ Sci & Technol USTHB, Fac Phys, Phys Mat Lab, Algiers, Algeria
关键词
Polypropylene; charge current; gamnta radiation; charge packet; POLYETHYLENE; IRRADIATION; CONDUCTION; CHARGE; POLYESTERS; PET;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Electrical behavior of gamma irradiated isotactic polypropylene (iPP) films for different applied field and temperatures is reported in this work The induced change in the transient charging current for the irradiated film, in comparison of virgin one, was studied in the dc field range 2 - 4 MV/m, at different temperatures (23 - 100 degrees C). A 25 microns thick film was irradiated in air at room temperature by means of a Co-60 gamma source at a dose of 100 kGy. A considerable increase in isochronal current for the irradiated films was observed. Further, it was also noticed that oscillations were detected in transient charging current, for the irradiated sample but not in virgin one. The different oscillations periods were related to applied field and temperature. This behaviour was associated with charge packet propagation which is the consequence of changes in the polymer microstructure induced by gamma radiation.
引用
收藏
页码:756 / 759
页数:4
相关论文
共 50 条
  • [21] Thermal properties of isotactic polypropylene degraded with gamma irradiation
    Krupa, I
    Luyt, AS
    POLYMER DEGRADATION AND STABILITY, 2001, 72 (03) : 505 - 508
  • [22] The morphology of the gamma form of isotactic polypropylene at 200 MPa
    Mezghani, K
    Phillips, PJ
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 1810 - 1814
  • [23] Morphology of the gamma form of isotactic polypropylene at 200 MPa
    Mezghani, Khaled
    Phillips, Paul J.
    Journal of Engineering and Applied Science, 1996, 2 : 1810 - 1814
  • [24] Thermal degradation behaviour of isotactic polypropylene blended with lignin
    Canetti, M
    Bertini, F
    De Chirico, A
    Audisio, G
    POLYMER DEGRADATION AND STABILITY, 2006, 91 (03) : 494 - 498
  • [25] DEPENDENCE OF ELECTRICAL BREAKDOWN ON SPHERULITE SIZE IN ISOTACTIC POLYPROPYLENE
    CERES, BV
    SCHULTZ, JM
    JOURNAL OF APPLIED POLYMER SCIENCE, 1984, 29 (12) : 4183 - 4197
  • [26] Influence of the irradiation parameters on the molecular modifications of an isotactic polypropylene gamma-irradiated under vacuum
    Spadaro, G
    Valenza, A
    POLYMER DEGRADATION AND STABILITY, 2000, 67 (03) : 449 - 454
  • [27] INFLUENCE OF APPRETE ON COMPOSITES BASED ON ISOTACTIC POLYPROPYLENE
    Jafarov, Valeh J.
    Alimirzaeva, Nahida A.
    Manafov, Mubariz A.
    Bektashi, Sevil A.
    Radzhabova, Mansura J.
    Khalilova, Sanam M.
    Musayeva, Gulnara Kh.
    PROCESSES OF PETROCHEMISTRY AND OIL REFINING, 2025, 26 (02): : 511 - 523
  • [28] INFLUENCE OF THE CRYSTALLIZATION TEMPERATURE ON THE MORPHOLOGY OF ISOTACTIC POLYPROPYLENE
    IDRISSI, MOB
    CHABERT, B
    GUILLET, J
    MAKROMOLEKULARE CHEMIE-MACROMOLECULAR CHEMISTRY AND PHYSICS, 1985, 186 (04): : 881 - 892
  • [29] Influence of stereotacticity defects on the crystallization of isotactic polypropylene
    Ozisik, Rahmi
    Chen, Xiaofeng
    Kumar, Sanat K.
    Mattice, Wayne L.
    Choi, Phillip
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2007, 233
  • [30] Influence of Nucleating Agent on Properties of Isotactic Polypropylene
    Wang, Wensheng
    Zhang, Xuejun
    Zhu, Ying
    Liu, Ting
    ASIAN JOURNAL OF CHEMISTRY, 2014, 26 (08) : 2215 - 2220