Surface treatment and nickel plating of iron powder metallurgy parts for corrosion protection

被引：13
作者：
Etaat, M. [1 ]
Emamy, M. [1 ]
Ghambari, M. [1 ]
Fadaei, E. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Tehran 553, Iran
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 09期
关键词：
Powder metallurgy; Surface treatments; Nickel plating; Corrosion; P/M PARTS; COMPACTS;
D O I：
10.1016/j.matdes.2009.02.029
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study is the evaluation of corrosion behavior of nickel coated iron compacts produced by powder metallurgy (PM). To improve the quality of PM products three different secondary operations: copper infiltration, resin impregnation and steam-treatment were applied for pore closuring of iron PM specimens before being electroplated by nickel. After microstructural studies, salt fog exposure and electrochemical tests were carried out to study the corrosion behavior of the nickel coated specimens. The results showed that, nickel coated steam treated specimens exhibit better performance on corrosion testing in comparison with others. Although copper infiltrated specimens showed less porosity in PM products, observed limited corrosion behavior can be due to its galvanic effect. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3560 / 3565
页数：6
相关论文
共 49 条
  • [41] Corrosion Behavior of Low-Temperature Nickel and Iron Aluminized Martensitic Stainless Steel Substrates with Different Surface Roughness in Acidic Medium
    Hora Paknahad
    Farhad Shahriari Nogorani
    Journal of Materials Engineering and Performance, 2023, 32 : 1874 - 1882
  • [42] Effect of Heat Treatment on the Corrosion Behaviour of Nickel Surface-Deposited Agro-Reinforced Metal Matrix Composites
    Ebenezer N.S.
    Vinod B.
    Jagadesh H.S.
    Journal of The Institution of Engineers (India): Series D, 2021, 102 (02) : 345 - 354
  • [43] Influence of powder heat treatment and particle size on the corrosion performance of cold-sprayed nickel-aluminum bronze (NAB) for repair applications
    Vinay, Gidla
    Kant, Ravi
    Singh, Harpreet
    CORROSION SCIENCE, 2024, 238
  • [44] Comparing three strategies for surface treatment of Mg coated by hexamethylene diamine tetra methylene phosphonic acid for corrosion protection
    Soliman, Hanaa
    Abdel Mouez, Fatma
    Hussien, Hoda
    Makhlouf, Abdel Salam
    Wan, Guojiang
    SURFACE AND INTERFACE ANALYSIS, 2024, 56 (01) : 62 - 69
  • [45] Influence of nitinol wire surface treatment on oxide thickness and composition and its subsequent effect on corrosion resistance and nickel ion release
    Clarke, B.
    Carroll, W.
    Rochev, Y.
    Hynes, M.
    Bradley, D.
    Plumley, D.
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 2006, 79A (01) : 61 - 70
  • [46] A two-step surface treatment, combining anodisation and silanisation, for improved corrosion protection of the Mg alloy WE54
    Pinto, R.
    Carmezim, M. J.
    Ferreira, M. G. S.
    Montemor, M. F.
    PROGRESS IN ORGANIC COATINGS, 2010, 69 (02) : 143 - 149
  • [47] A Simple Surface Treatment for Mg to Gain Enhanced Resistance to Corrosion and Corrosive Wear by Hammering Al Powder-Covered Mg Substrate
    He, Anqiang
    Tang, Yunqing
    Wu, Mingyu
    Chen, Daolun
    Li, Dongyang
    ADVANCED MATERIALS INTERFACES, 2022, 9 (17)
  • [48] Laser shock peening (LSP): Electrochemical and hydrodynamic investigation of corrosion protection pre-treatment for a copper surface in 3.5 % NaCl medium
    Chukwuike, V. I.
    Echem, O. G.
    Prabhakaran, S.
    AnandKumar, S.
    Barik, R. C.
    CORROSION SCIENCE, 2021, 179
  • [49] Effect of surface pre-treatment by silanization on corrosion protection of AA2024-T3 alloy by sol-gel nanocomposite coatings
    Lakshmi, R. V.
    Yoganandan, G.
    Mohan, A. V. N.
    Basu, Bharathibai J.
    SURFACE & COATINGS TECHNOLOGY, 2014, 240 : 353 - 360
12345