Surface treatment and nickel plating of iron powder metallurgy parts for corrosion protection

被引：13
|
作者：
Etaat, M. [1 ]
Emamy, M. [1 ]
Ghambari, M. [1 ]
Fadaei, E. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Tehran 553, Iran
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 09期
关键词：
Powder metallurgy; Surface treatments; Nickel plating; Corrosion; P/M PARTS; COMPACTS;
D O I：
10.1016/j.matdes.2009.02.029
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study is the evaluation of corrosion behavior of nickel coated iron compacts produced by powder metallurgy (PM). To improve the quality of PM products three different secondary operations: copper infiltration, resin impregnation and steam-treatment were applied for pore closuring of iron PM specimens before being electroplated by nickel. After microstructural studies, salt fog exposure and electrochemical tests were carried out to study the corrosion behavior of the nickel coated specimens. The results showed that, nickel coated steam treated specimens exhibit better performance on corrosion testing in comparison with others. Although copper infiltrated specimens showed less porosity in PM products, observed limited corrosion behavior can be due to its galvanic effect. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3560 / 3565
页数：6
相关论文
共 49 条
  • [1] Corrosion protection of different environmentally friendly coatings on powder metallurgy magnesium
    Carboneras, M.
    Hernandez, L. S.
    del Valle, J. A.
    Garcia-Alonso, M. C.
    Escudero, M. L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 496 (1-2) : 442 - 448
  • [2] Corrosion behaviours of stainless steel parts formed by powder metallurgy process
    Meesak, Thanawat
    Thedsuwan, Chananan
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (03) : 9560 - 9568
  • [3] EFFECT OF COATING TIME ON CORROSION BEHAVIOR OF ELECTROLESS NICKEL-PHOSPHORUS COATED POWDER-METALLURGY IRON SPECIMENS
    SINGH, D
    BALASUBRAMANIAM, R
    DUBE, RK
    CORROSION, 1995, 51 (08) : 581 - 585
  • [4] Sinter hardening - a special heat treatment for powder metallurgy precision parts
    Dlapka, M.
    Danninger, H.
    Gierl, C.
    Lindqvist, B.
    HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2012, 67 (03): : 223 - 231
  • [5] Workability and corrosion behavior studies on sintered iron-based hybrid powder metallurgy alloys
    Reddy, Kathhi Palaksha
    Kandavel, Thanjavur Krishnamoorthi
    Raja, Selvaraj Nelson
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2022, 73 (11): : 1854 - 1864
  • [6] Investigation of corrosion behaviour of porous powder metallurgy parts electrochemically coated with diamond nano particles modified chromium
    Bilgili, E. Zeynep
    Salamci, Elmas
    Asan, Abdurrahman
    Unal, Rahmi
    Valov, Radoslav
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2016, 31 (03): : 580 - 589
  • [7] Effect of electrolytic nickel coating on fatigue life of iron based powder metal parts
    Cinici, H.
    Karacif, K.
    Kafkas, F.
    Citak, R.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2011, 49 (05): : 355 - 359
  • [8] Investigation of machinability of iron based metal matrix composite (MMC) powder metallurgy parts
    Szalay, Tibor
    Czampa, Miklos
    Markos, Sandor
    Farkas, Balazs
    2ND INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS, 2012, 1476 : 300 - 303
  • [9] The Effect of Nickel on the Microstructure, Mechanical Properties and Corrosion Properties of Niobium-Vanadium Microalloyed Powder Metallurgy Steels
    Ahssi, Mohamed Ahmed Mohamed
    Erden, Mehmet Akif
    Acarer, Mustafa
    Cug, Harun
    MATERIALS, 2020, 13 (18)
  • [10] Medium-Frequency Electrical Resistance Sintering of Soft Magnetic Powder Metallurgy Iron Parts
    Astacio, Raquel
    Ternero, Fatima
    Cintas, Jesus
    Cuevas, Francisco G.
    Montes, Juan Manuel
    METALS, 2021, 11 (06)
12345