Modeling of low-pressure subcooled boiling flow of water via the homogeneous MUSIG approach

Applying a three-dimensional two-fluid model coupled with homogeneous multiple size group (MUSIG) approach, numerical simulations of upward subcooled boiling flow of water at low pressure were performed on the computational fluid dynamics (CFD) code CFX-10 with user defined FORTRAN program. A modified bubble departure diameter correlation based on the Unal's semi-mechanistic model and the empirical correlation of Tolubinski and Kostanchuk was developed. The water boiling flow experiments at low pressure in a vertical concentric annulus from reference were used to validate the models. Moreover, the influences of the non-drag force on the radial void fraction distribution were investigated, including lift force, turbulent dispersion force and wall lubrication force. Good quantitative agreement with the experimental data is obtained, including the local distribution of bubble diameter, void fraction, and axial liquid velocity. The results indicate that the local bubble diameter first increases and then decreases due to the effect of bubble breakup and coalescence, and has the maximum bubble diameter along the radial direction. Especially, the peak void fraction phenomenon in the vicinity of the heated wall is predicted at low pressure, which is developed from the wall repulsive force between vapor bubbles and heated wall. Nevertheless, there is a high discrepancy for the prediction of the local axial vapor velocity. (C) 2009 Elsevier B.V. All rights reserved.