Performance and emissions of a compression-ignition direct-injected natural gas engine with shielded glow plug ignition assist

Performance and emissions experiments were conducted on a compression-ignition direct-injected natural gas engine (DING) equipped with a shielded glow plug ignition assist system. Tests were conducted at three different intake pressures (34.5 kPag, 68.9 kPag, 103.4 kPag), and four nominal (targeted) equivalence ratios (0.2, 0.3, 0.4, 0.5). CH4, NOx, CO and PM emissions were measured and analyzed, showing that emissions levels are influenced by the DING engine's combustion modes and intake pressure. Premixed combustion which dominates at low equivalence ratios resulted in higher levels of CH4 and NOx emissions, while mixing-controlled combustion, which develops at higher equivalence ratios, resulted in elevated CO and PM levels. Higher intake pressure was found to improve all emissions levels. The most significant effect was the reduction of PM and CO emissions due to improved fuel charge mixing and air entrainment that results from a pressure-driven momentum increase of the engine's air swirl field. Brake specific emissions and fuel consumption were estimated and compared against levels reported in the literature for dual-fuel port-injection, and High-Pressure Direct Injection (HPDI) natural gas engines. The most significant finding was that the DING engine exhibits lower fuel consumption and PM emissions levels when compared to values reported in the literature for HPDI engines. The PM emissions advantage was attributed to a higher proportion of premixed combustion and the absence of a diesel pilot in DING engine operation. Lastly, PM size distributions were analyzed, showing that the DING engine produces PM that is smaller than PM of a conventional diesel engine, but similar to the PM reported in the literature for HPDI engines.