Model Predictive Direct Current Control of a Permanent Magnet Synchronous Generator Based on Flexible Lyapunov Function Considering Converter Dead Time

被引:22
作者
Barisa, Tin [1 ]
Iles, Sandor [1 ]
Sumina, Damir [1 ]
Matusko, Jadranko [1 ]
机构
[1] Univ Zagreb, Fac Elect Engn & Comp, Zagreb 10000, Croatia
关键词
AC generators; converters; current control; permanent magnet generators; predictive control; wind power generation; WIND TURBINE; COMPENSATION; INVERTER; SYSTEMS; SCHEME;
D O I
10.1109/TIA.2018.2801838
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper proposes a dual-mode model predictive direct current control (MP-DCC) of a permanent magnet synchronous generator (PMSG). The proposed algorithm is capable of minimizing switching losses in a two-level synchronous generator side converter (SGSC). A new prediction model that takes the converter dead time into consideration when choosing the optimal switching state is introduced. The proposed prediction model provides a more accurate state prediction, ensuring that the states of the system stay inside the control invariant set in the steady state, even in the case of a significant converter dead time. To guarantee recursive feasibility and closed-loop stability, a flexible control Lyapunov function (CLF) is employed as an optimization problem constraint, which enables the minimization of switching losses both during transients and in the steady state. The influence of the converter dead time on the performance of the proposed algorithm is considered, and accordingly, a control invariant set is determined. Simulation results show that stator currents are kept within the control invariant set if dead time is taken into account in the prediction model. Furthermore, the proposed algorithm is implemented in a digital control system and experimentally verified on a 375 kW interior PMSG. Experimental results verify that the proposed control algorithm provides a successful flying start of the PMSG and show that the application of the flexible CLF results in a lower switching frequency, but also in higher current ripple. By adjusting the upper bound of the control invariant set, a desired tradeoff between the low stator current ripple and the minimization of switching losses can be achieved.
引用
收藏
页码:2899 / 2912
页数:14
相关论文
共 31 条
[1]  
Aguilera R. P., 2011, 2011 IEEE Workshop on Predictive Control of Electrical Drives and Power Electronics, P55, DOI 10.1109/PRECEDE.2011.6078688
[2]   Predictive Control of Power Converters: Designs With Guaranteed Performance [J].
Aguilera, Ricardo P. ;
Quevedo, Daniel E. .
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2015, 11 (01) :53-63
[3]  
Barisa T, 2016, IEEE INT POWER ELEC, P98, DOI 10.1109/EPEPEMC.2016.7751981
[4]   Self-Commissioning of Inverter Dead-Time Compensation by Multiple Linear Regression Based on a Physical Model [J].
Bedetti, Nicola ;
Calligaro, Sandro ;
Petrella, Roberto .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2015, 51 (05) :3954-3964
[5]   Future on Power Electronics for Wind Turbine Systems [J].
Blaabjerg, Frede ;
Ma, Ke .
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS, 2013, 1 (03) :139-152
[6]   Inverter output voltage synthesis using novel dead time compensation [J].
Choi, JW ;
Sul, SK .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 1996, 11 (02) :221-227
[7]   Delay Compensation in Model Predictive Current Control of a Three-Phase Inverter [J].
Cortes, Patricio ;
Rodriguez, Jose ;
Silva, Cesar ;
Flores, Alexis .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2012, 59 (02) :1323-1325
[8]   Model Predictive Direct Torque Control of Permanent Magnet Synchronous Motors [J].
Geyer, Tobias ;
Beccuti, Giovanni A. ;
Papafotiou, Georgios ;
Morari, Manfred .
2010 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION, 2010, :199-206
[9]   Model Predictive Direct Torque Control-Part I: Concept, Algorithm, and Analysis [J].
Geyer, Tobias ;
Papafotiou, Georgios ;
Morari, Manfred .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2009, 56 (06) :1894-1905
[10]   THE ANALYSIS AND COMPENSATION OF DEAD-TIME EFFECTS IN PWM INVERTERS [J].
JEONG, SG ;
PARK, MH .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 1991, 38 (02) :108-114