EXPERIMENTAL AND NUMERICAL VALIDATION OF THE IMPROVED VORTEX METHOD APPLIED TO CP745 MARINE PROPELLER MODEL

被引：3

作者：

Krol, Przemyslaw ^{[1
,2
]}

Tesch, Krzysztof ^{[2
]}

机构：

[1] Ship Design & Res Ctr, Szczecinska 65, PL-80392 Gdansk, Poland

[2] Gdansk Univ Technol, Gabriela Narutowicza 11-12, PL-80233 Gdansk, Poland

来源：

POLISH MARITIME RESEARCH | 2018年 / 25卷 / 02期

关键词：

Marine Propeller; Open Water Test; Experiment; Lifting Surface; CFD; DESIGN; WAKE;

D O I：

10.2478/pomr-2018-0054

中图分类号：

U6 [水路运输]; P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

The article presents a numerical analysis of the CP745 marine propeller model by means of the improved vortex method and CFD simulations. Both numerical approaches are validated experimentally by comparing with open water characteristics of the propeller. The introduced modification of the vortex method couples the lifting surface approach for the propeller blades and the boundary element method for the hub. What is more, a simple algorithm for determination of the propeller induced advance angles is established. The proposed modifications provide better results than the original version of the vortex method. The accuracy of the improved method becomes comparable to CFD predictions, being at the same time a few hundred times faster than CFD.

引用

页码：57 / 65

页数：9

共 19 条

[1] Improved Performance Prediction of Marine Propeller: Numerical Investigation and Experimental Verification
Tan, Yue
Li, Jing
Li, Yuan
Liu, Chunbao
MATHEMATICAL PROBLEMS IN ENGINEERING, 2019, 2019
[2] An improved mesh refinement method to study the tip vortex cavitation of a marine propeller
Zhu, Wencai
Zhou, Feng
Zhao, Jinpeng
SHIPS AND OFFSHORE STRUCTURES, 2022, 17 (10) : 2340 - 2354
[3] Experimental Validation of an FEM Model Based on Lifting Theory Applied to Propeller Design Software
Grzadziela, Andrzej
Kraskowski, Marek
Krol, Przemyslaw
Szturomski, Bogdan
Kicinski, Radoslaw
POLISH MARITIME RESEARCH, 2024, 31 (02) : 67 - 76
[4] AN IMPROVED METHOD FOR THE EXPERIMENTAL VALIDATION OF NUMERICAL MIXING TIME PREDICTIONS
TAYLOR, IF
DANG, P
SCHWARZ, MP
WRIGHT, JK
72ND STEELMAKING CONFERENCE PROCEEDINGS, 1989, 72 : 505 - 516
[5] A PHYSICAL MODEL FOR THE TIP VORTEX LOSS - EXPERIMENTAL VALIDATION AND SCALING METHOD
Karstadt, Sascha
Pelz, Peter F.
PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 8, PTS A-C, 2012, : 73 - 81
[6] Time domain method for the prediction of pressure fluctuation induced by propeller sheet cavitation: Numerical simulations and experimental validation
Seol, Hanshin
OCEAN ENGINEERING, 2013, 72 : 287 - 296
[7] Numerical Study and Experimental Validation of a Method for Model Updating of Boundary Conditions in Beams
Silva, Christian E.
Dyke, Shirley J.
DYNAMICS OF CIVIL STRUCTURES, VOL 2, 2015, : 273 - 281
[8] An improved method for predicting the shear strength of corroded reinforced concrete beams with experimental and numerical validation
Xue, Xin
Cheng, Jian
STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2023,
[9] Numerical Validation of a Vortex Model against Experimental Data on a Straight-Bladed Vertical Axis Wind Turbine
Dyachuk, Eduard
Goude, Anders
Energies, 2015, 8 (10): : 11800 - 11820
[10] A ductile failure model applied to the determination of the fracture toughness of welded joints.: Numerical simulation and experimental validation
Penuelas, I.
Betegon, C.
Rodriguez, C.
ENGINEERING FRACTURE MECHANICS, 2006, 73 (18) : 2756 - 2773

← 1 2 →