Study on Creep Performance of Fast-growing Poplar modified with ACQ-D

被引:0
|
作者
Yue Kong [1 ]
Zhang, W. [1 ]
Xia, Y. [1 ]
Wang, S. [1 ]
Lu Xiaoning [1 ]
机构
[1] Nanjing Univ Technol, Coll Civil Engneering, Nanjing 210009, Peoples R China
来源
PROCEEDINGS OF THE CONFERENCE ON ENGINEERED WOOD PRODUCTS BASED ON POPLAR/WILLOW WOOD | 2008年
关键词
Fast-growing poplar; ACQ; wood preservation; mechanical performance; creep deformation;
D O I
暂无
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
People have paid more attention. to continuous developing environmental quality since the new century. Now, designers attach importance to wood materials that could be used in construction. However, wood is liable to be attacked by fungi and insects. It is necessary to enable wood materials with strong anti-decay ability when the material is to be used in exterior applications. The major wood materials which could gain easily are based on wood from fast-grown trees. Therefore, fast-grown poplar was chosen for this experiment. Fast-grown poplar samples were modified with ACQ-D. Furthermore the static mechanical and creep performance of this modified wood should be emphasized and measured when used as structural materials. The results showed that the mechanical strength of modified samples is almost equal to that of the unmodified. However, the anti-creep performance of modified samples was lower than that of the unmodified under the same bearing scales. Wood samples were much more affected by relative humidity after treatment with ACQ-D.
引用
收藏
页码:98 / 103
页数:6
相关论文
共 50 条
  • [1] Investigation of the Creep Property of Fast-growing Poplar Wood Modified with Low Molecular Weight Resins
    Yue, Kong
    Liu, Weiqing
    Chen, Zhangjing
    Lu, Xiaoning
    Lu, Weidong
    BIORESOURCES, 2016, 11 (01): : 1620 - 1633
  • [2] Flow rate and fixation of ACQ-D preservative in poplar living tree after injection
    Liu, Zhu
    Wang, Xuan
    Zhang, Yaoli
    Wen, Liang
    Zheng, Lin
    Cai, Liping
    WOOD SCIENCE AND TECHNOLOGY, 2019, 53 (02) : 373 - 391
  • [3] Shrinkage of fast-growing hybrid poplar clones
    Koubaa, A
    Hernandez, RE
    Beaudoin, M
    FOREST PRODUCTS JOURNAL, 1998, 48 (04) : 82 - 87
  • [4] Optimizing design for glulam beams made of modified wood of fast-growing poplar
    Zhang Rui
    Wang Zhiqiang
    Lu Xiaoning
    Na Bin
    Yue Kong
    PROCEEDINGS OF THE CONFERENCE ON ENGINEERED WOOD PRODUCTS BASED ON POPLAR/WILLOW WOOD, 2008, : 128 - 134
  • [5] Flow rate and fixation of ACQ-D preservative in poplar living tree after injection
    Zhu Liu
    Xuan Wang
    Yaoli Zhang
    Liang Wen
    Lin Zheng
    Liping Cai
    Wood Science and Technology, 2019, 53 : 373 - 391
  • [6] Evaluation of the Bending Properties of Modified Fast-growing Poplar Glulam Based on Composite Mechanics
    Han, Zhenhua
    Zhang, Ray
    Song, Boqi
    BIORESOURCES, 2018, 13 (03): : 7071 - 7085
  • [7] APMP of different age and species of fast-growing poplar
    Long, Zhu
    Li, Jian-Hua
    Wang, Bao
    Sun, Duo-Xian
    Tian, Ju-Long
    Chung-kuo Tsao Chih/China Pulp and Paper, 2005, 24 (01): : 10 - 12
  • [8] Evaluation of the bending properties of modified fast-growing poplar glulam based on composite mechanics
    Han Z.
    Zhang R.
    Song B.
    BioResources, 2019, 13 (03) : 7071 - 7085
  • [9] The Growth Charactersitics Study of Introduction Fast-growing Poplar at the Initial Stage of Afforestation
    Lian, Peiyong
    Liu, Jinye
    Wang, Liankuan
    ADVANCES IN ENVIRONMENTAL TECHNOLOGIES, PTS 1-6, 2013, 726-731 : 4270 - +
  • [10] Study on Soda-AQ Pulping of the Fast-growing Poplar with Pretreatment Processes
    Yang, Guihua
    Dai, Hongqi
    Chen, Kefu
    Chen, Jiachuan
    Dong, Yi
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON PULPING, PAPERMAKING AND BIOTECHNOLOGY 2008: ICPPB '08, VOL 2, 2008, : 161 - 164