Ultrasonic measurement of oil film thickness between the roller and the inner raceway in a roller bearing

Purpose - This paper aims to measure the oil film thickness between the roller and the inner ring in roller bearings by the ultrasonic method. The oil film thickness between the roller and the inner ring in roller bearings is a key performance indicator of the bearing lubrication condition. As the oil film is very thin and the contact region is very narrow, measurement of this film thickness is very challenging. A promising ultrasonic method was used to measure this film thickness, and this method was expected to overcome some drawbacks in other methods. Design/methodology/approach - A simplified roller bearing only configured one roller, and an inner ring was built up to investigate this measurement. A miniature piezoelectric element is bonded on the inner surface of the inner ring to measure the reflection coefficient from the layer of oil between the roller and the inner raceway. As the width of the line contact region is smaller than the width of the piezoelectric element, a ray model is used to calibrate the reflection coefficient measured. The quasi-static spring model is then used to calculate oil film thickness from the corrected reflection coefficient data. Findings - The results measured by this method agree reasonably well with predictions from elastohydrodynamic lubrication (EHL) theory. Also, a dynamic displacement of the rig caused by the skid of the roller versus the inner ring was found under light-load and high-speed conditions. Originality/value - This work shows that the oil film between the roller and the inner raceway in roller bearings can be measured accurately by ultrasound and shows a deal method when the contact width is smaller than the piezoelectric element width.