The Effect of Heat Sink Properties on Solar Cell Cooling Systems

被引：31

作者：

Arifin, Zainal ^{[1
]}

Suyitno, Suyitno ^{[1
]}

Tjahjana, Dominicus Danardono Dwi Prija ^{[1
]}

Juwana, Wibawa Endra ^{[1
]}

Putra, Mufti Reza Aulia ^{[1
]}

Prabowo, Aditya Rio ^{[1
]}

机构：

[1] Univ Sebelas Maret, Dept Mech Engn, Jl Ir,Sutami 36A, Cent Java 57126, Surakarta, Indonesia

来源：

APPLIED SCIENCES-BASEL | 2020年 / 10卷 / 21期

关键词：

solar cell; cooling performance; heat sink; TEMPERATURE; PERFORMANCE; EFFICIENCY; POWER;

D O I：

10.3390/app10217919

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

High energy demand is leading to the replacement of fossil energy with renewable sources such as solar energy. Solar cells are devices used to generate solar energy. However, when exposed to sunlight with high intensity, a solar cell can suffer a decrease in performance due to overheating. This issue can be addressing by adding a cooling system. This study used a passive cooling system by adding a heat sink with fins to the body panel of the solar cell. The advantage of the passive cooling system is that it does not require additional energy. The number of fins and types of material were varied to obtain the best passive cooling system. The number of fins used was 5, 10, and 15, and the materials used were aluminum and copper. The wind speed vector and the temperature distribution were investigated through simulation. The results showed an increase in the number of fins provided better cooling capacity and increased the photovoltaic performance. The best cooling capability and performance were obtained using 15 fins with a copper base and fin heat sink materials. The decrease in temperature and the increase in efficiency were 10.2 degrees C and 2.74%, respectively. Therefore, the use of passive cooling system based on heat sinks with fins could provide a potential solution to increase performance and prevent overheating of photovoltaic (PV) panel systems.

引用

页码：1 / 16

页数：15

共 35 条

[1]

[Anonymous], 2017, Fundamentals of Heat and Mass Transfer, DOI DOI 10.1016/J.APPLTHERMALENG.2011.03.022

[2] Dependence of PV Module Temperature on Incident Time-Dependent Solar Spectrum [J].

Appelbaum, Joseph ;

Maor, Tamir .

APPLIED SCIENCES-BASEL, 2020, 10 (03)

[3] Improved Performance of Dye-Sensitized Solar Cells with TiO2 Nanoparticles/Zn-Doped TiO2 Hollow Fiber Photoanodes [J].

Arifin, Zainal ;

Suyitno, Suyitno ;

Hadi, Syamsul ;

Sutanto, Bayu .

ENERGIES, 2018, 11 (11)

[4]

Cengel YA, 2003, Heat Transfer: A Practical Approach, Vsecond

[5] Improving Photovoltaic Panel Using Finned Plate of Aluminum [J].

El Mays, Ahmad ;

Ammar, Rami ;

Hawa, Mohamad ;

Abou Akroush, Mohamad ;

Hachem, Farouk ;

Khaled, Mahmoud ;

Ramadan, Mohamad .

INTERNATIONAL CONFERENCE ON TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY, TMREES17, 2017, 119 :812-817

[6]

Fahendri F., 2014, ANALISA NUMERIK DIST, V2, P81

[7]

Gotmare J.A., 2015, INT J ADV TECHNOL EN, V3, P447

[8]

Guardian Ian, 2020, Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials. ICE-SEAM 2019. Lecture Notes in Mechanical Engineering (LNME), P437, DOI 10.1007/978-981-15-4481-1_42

[9]

Harsanto A.B., 2011, SIMULASI CFD PERPIND, V12, P1

[10] Global advancement of cooling technologies for PV systems: A review [J].

Hasanuzzaman, M. ;

Malek, A. B. M. A. ;

Islam, M. M. ;

Pandey, A. K. ;

Rahim, N. A. .

SOLAR ENERGY, 2016, 137 :25-45

← 1 2 3 4 →