Effects of argon plasma treatment on the adhesion property of ultra high molecular weight polyethylene (UHMWPE) textile

被引：44

作者：

Huang, Chi-Yuan ^{[1
]}

Wu, Jing-Yi ^{[1
]}

Tsai, Chin-Shan ^{[1
]}

Hsieh, Kuo-Huang ^{[2
]}

Yeh, Jen-Taut ^{[3
]}

Chen, Ken-Nan ^{[4
]}

机构：

[1] Tatung Univ, Dept Mat Engn, Taipei 10452, Taiwan

[2] Natl Taiwan Univ, Inst Polymer Sci & Engn, Taipei 10617, Taiwan

[3] Natl Taiwan Univ Sci & Technol, Dept Mat Sci & Engn, Taipei 10607, Taiwan

[4] Tamkang Univ, Dept Chem, New Taipei City 25137, Taiwan

来源：

SURFACE & COATINGS TECHNOLOGY | 2013年 / 231卷

关键词：

UHMWPE; Surface modification; Adhesive; Peel strength; SURFACE MODIFICATION; FIBERS;

D O I：

10.1016/j.surfcoat.2012.04.069

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this investigation, effects of argon plasma on surface modification of ultra high molecular weight polyethylene (UHMWPE) textile were studied. After argon plasma treatment, the peeling test of UHMWPE textile/adhesive (PU_T01) composites were measured by ISO 10339:2003 and then observed the morpho-surface composites by SEM analysis. In addition, the contact angle of UHMWPE textile by argon plasma was also measured. Results showed that the peel strength of UHMWPE textile/adhesive (PU_T01) composites was increased from 0.6 kgf/in to 4.6 kgf/in as argon plasma treatment with treated power of 40 W and treated time of 5 min. From SEM observation, the surface of UHMWPE textile was introduced the number of anchors after argon plasma treatment. After plasma treatment, the UHMWPE react with adhesive. And the contact angle on surface of UHMWPE textile was decreased from 80 degrees to 28 degrees. (C) 2012 Elsevier B.V. All rights reserved.

引用

页码：507 / 511

页数：5

共 13 条

[1] SOME OBSERVATIONS ON THE PRODUCTION OF POLYETHYLENE FIBERS BY THE SURFACE GROWTH METHOD [J].