Nanometric multilayers: A new approach for joining TiAl

被引：52

作者：

Ramos, A. S.

Vieira, M. T.

Duarte, L. I.

Vieira, M. F.

Viana, F.

Calinas, R.

机构：

[1] Univ Coimbra, Fac Ciencias & Tecnol, Dept Engn Mecan, ICEMS, P-3030788 Coimbra, Portugal

[2] Univ Porto, Fac Engn, Dept Engn Met, GMM IMAT, P-4200465 Oporto, Portugal

来源：

INTERMETALLICS | 2006年 / 14卷 / 10-11期

关键词：

titanium aluminides; based on TiAl; nonstructured intermetallics; surface properties; thin films; joining;

D O I：

10.1016/j.intermet.2005.12.012

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

A novel intermetallic alloy diffusion bonding procedure is being developed. The innovative aspect relies on the use of sputtered nanometallic multilayers made up of the elements present in the bulk intermetallics to enhance the bonding mechanisms. For this purpose a deep knowledge of the multilayer thin films is required, focusing on thermal phase stability and grain size evolution. gamma-TiAl was selected for this study and Ti/Al multilayer thin films with nanometric period (Lambda = 4 nm) were deposited onto Ti-(45-49)Al-(3-2)Nb-2Cr (at.%) substrates by d.c. magnetron sputtering. The as-deposited titanium and aluminium nanolayers with crystallite sizes of 5-50 nm evolve toward the equilibrium gamma-TiAl structure after heat treatment for at least up to 600 degrees C at a 10 degrees C min(-1) heating rate. Whatever the heating temperature and holding time, between 600 and 1000 degrees C, the gamma-TiAl phase is stable. During the thermal cycle the growth of the nanometric grains is promoted, this effect being more pronounced as the temperature and holding time increase. Consequently, the hardness decreases from 11.9 GPa (600 degrees C, 1 h) to 6.5 GPa (1000 degrees C 3 h). This study allowed the thermal treatment required to join gamma-TiAl parts to be established. (C) 2006 Elsevier Ltd. All rights reserved.

引用

页码：1157 / 1162

页数：6

共 19 条

[11]

KIM YW, 1994, JOM-J MIN MET MAT S, V46, P30, DOI 10.1007/BF03220745

[12] Sputtered intermetallic Ti-Al-X coatings: phase formation and oxidation behavior [J].

Leyens, C ;

Schmidt, M ;

Peters, M ;

Kaysser, WA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 240 :680-687

[13]

MICHAELSEN C, 1994, MATER RES SOC SYMP P, V343, P205, DOI 10.1557/PROC-343-205

[14] DIFFUSION BONDING OF INTERMETALLIC COMPOUND TIAL [J].

NAKAO, Y ;

SHINOZAKI, K ;

HAMADA, M .

ISIJ INTERNATIONAL, 1991, 31 (10) :1260-1266

[15] Properties of γ-TiAl-M (M = Ag, Cr) sputtered films [J].

Ramos, AS ;

Vieira, MT .

THERMEC'2003, PTS 1-5, 2003, 426-4 :1843-1848

[16]

RAMOS AS, IN PRESS SURF COAT T

[17] Mechanical characterisation of γ-TiAl thin films obtained by two different sputtering routes [J].

Vieira, MT ;

Trindade, B ;

Ramos, AS ;

Fernandes, JV ;

Vieira, MF .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 329 :147-152

[18] An approach using thin films as a predictive way to produce new bulk materials [J].

Vieira, MT ;

Ramos, AS ;

Trindade, B ;

Fernandes, JV ;

Vieira, MF .

SURFACE & COATINGS TECHNOLOGY, 2000, 131 (1-3) :162-166

[19] DIFFUSION-BONDING OF TIAL [J].

YAN, P ;

WALLACH, ER .

INTERMETALLICS, 1993, 1 (02) :83-97

← 1 2 →