Crack closure: A concept of fatigue crack growth under examination

被引:26
作者
Riemelmoser, FO
Pippan, R
机构
[1] Erich-Schmid-Inst. Solid State Phys., Austrian Academy of Science
关键词
mode I fatigue cracks; asperity-induced crack closure; plasticity-induced crack closure;
D O I
10.1111/j.1460-2695.1997.tb01508.x
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In recent literature it is asserted that the concept of crack closure in fatigue fracture mechanics is not capable of explaining fatigue crack growth behaviour. The reasons given are that both asperity induced crack closure and plasticity induced crack closure should be either negligible or non-existent. We have re-considered these hypotheses since their correctness would completely change the established picture of fatigue crack growth. In order to get mathematically tractable systems the present studies are confined to long cracks loaded in mode I. The results suggest that in case of asperity induced crack closure the proposed hypothesis is only true in special cases and the demonstration of the non-existence of plasticity induced crack closure is proved to be wrong.
引用
收藏
页码:1529 / 1540
页数:12
相关论文
共 21 条
[1]  
[Anonymous], STRESS ANAL CRACKS H
[2]   ANALYSIS OF CLOSURE IN FATIGUE CRACK GROWTH [J].
BUDIANSKY, B ;
HUTCHINSON, JW .
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1978, 45 (02) :267-276
[3]   A model for crack closure [J].
Chen, DL ;
Weiss, B ;
Stickler, R .
ENGINEERING FRACTURE MECHANICS, 1996, 53 (04) :493-509
[4]  
EBI G, 1990, P FAT 90 HON, P1033
[5]  
Elber W., 1970, Engineering Fracture Mechanics, V2, P37, DOI 10.1016/0013-7944(70)90028-7
[6]   OVERVIEW NO-47 - CLEAVAGE, DISLOCATION EMISSION, AND SHIELDING FOR CRACKS UNDER GENERAL LOADING [J].
LIN, IH ;
THOMSON, R .
ACTA METALLURGICA, 1986, 34 (02) :187-206
[7]  
MCCLUNG RC, 1991, INT J FRACTURE, V50, P27
[8]  
Muskhelishvili N.I., 2013, SOME BASIC PROBLEMS
[9]  
Newton C.H., 1988, ASTM STP, V982, P139
[10]   DISLOCATION NUCLEATION FROM A CRACK TIP - AN ANALYSIS BASED ON THE PEIERLS CONCEPT [J].
RICE, JR .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1992, 40 (02) :239-271