Sliding wear behaviour of Al 6063/TiB2 in situ composites at elevated temperatures

被引：166

作者：

Natarajan, S. ^{[2
]}

Narayanasamy, R. ^{[1
]}

Babu, S. P. Kumaresh ^{[2
]}

Dinesh, G. ^{[1
]}

Kumar, B. Anil ^{[1
]}

Sivaprasad, K. ^{[2
]}

机构：

[1] Natl Inst Technol, Dept Prod Engn, Tiruchirappalli 620015, Tamil Nadu, India

[2] Natl Inst Technol, Dept Met & Mat Engn, Tiruchirappalli 620015, Tamil Nadu, India

来源：

MATERIALS & DESIGN | 2009年 / 30卷 / 07期

关键词：

Al-metal matrix composite (A); Wear (E); Scanning electron microscopy (G); TIB2; PARTICLES; ALLOY; REINFORCEMENT; FRICTION;

D O I：

10.1016/j.matdes.2008.09.037

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A low cost system of Al 6063 - xTiB(2) (x = 0, 5, 10 wt.%) in situ metal matrix composites (MMCs) were prepared by the reaction mixture of K2TiF6 and KBF4 with molten alloy. These in situ prepared composites were characterized by using scanning electron microscope, X-ray diffractometer, and microhardness analysis. The dry sliding wear behaviour of the prepared composite was investigated by using a Pin on Disc method at different applied loads of 9.8, 19.6 and 29.4 N for various temperatures (100, 200 and 300 degrees C). The study at room temperature was also carried out for comparison purpose. The results indicate that the wear rate decreases with the increase in the weight percentage of TiB2, while it increases with the increase in the applied load. (C) 2008 Elsevier Ltd. All rights reserved.

引用

页码：2521 / 2531

页数：11

共 34 条

[1] Dry sliding wear behavior of SiCp/QE22 magnesium alloy matrix composites [J].

Abachi, P. ;

Masoudi, A. ;

Purazrang, K. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 435 :653-657

[2]

ARNELL RD, 1975, MAT SCI ENG A-STRUCT, V31, P237

[3]

BASAVARAJAPPA S, 2006, MAT SCI PAL, V24

[4] High temperature sliding abrasion of a nickel-base alloy and composite [J].

Berns, H ;

Koch, S .

WEAR, 1999, 225 :154-162

[5] Tribological properties of aluminum alloy matrix TiB2 composite prepared by in situ processing [J].

Caracostas, CA ;

Chiou, WA ;

Fine, ME ;

Cheng, HS .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (02) :491-502

[6]

DAOUD MT, 2004, ASM INT, V13, P135

[7] Elevated temperature sliding wear behaviour of TiC-reinforced steel matrix composites [J].

Degnan, CC ;

Shipway, PH ;

Wood, JV .

WEAR, 2001, 251 :1444-1451

[8]

Deng JX, 1996, WEAR, V195, P128, DOI 10.1016/0043-1648(95)06806-6

[9] Friction and wear behaviour of Al2O3/TiB2/SiCw ceramic composites at temperatures up to 800°C [J].

Deng, JX .

CERAMICS INTERNATIONAL, 2001, 27 (02) :135-141

[10] The effect of sliding velocity on the tribological behavior of copper [J].

Emge, Andrew ;

Karthikeyan, S. ;

Kim, H. J. ;

Rigney, D. A. .

WEAR, 2007, 263 :614-618

← 1 2 3 4 →