Influence of the powder preparation on the sintering of Yb-doped Sc2O3 transparent ceramics

被引:21
作者
Bravo, A. C. [1 ]
Longuet, L. [1 ]
Autissier, D. [1 ]
Balumard, J. F. [2 ]
Vissie, P. [1 ]
Longuet, J. L. [1 ]
机构
[1] CEA, F-37260 Monts, France
[2] ENSCI, CNRS, SPCTS, Lab Sci Procedes Ceream & Traitements Surface,UMR, F-87065 Limoges, France
关键词
Transparent ceramics; Yb:Sc2O3; Solid state reaction; Powder-chemical preparation; Sintering; YTTRIA CERAMICS; LOW-TEMPERATURE; PRECIPITATION; FABRICATION; NANOPOWDERS; COMBUSTION; LASER;
D O I
10.1016/j.optmat.2008.05.004
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
We report the preparation and the sintering of high quality Yb:Sc2O3 powders with the ultimate intent to make transparent Yb:Sc2O3 ceramics for laser applications. The aim of the study is to compare two routes of powder preparation and observe the influence of the powder processing on the sintering of Yb-doped Sc2O3 ceramics. The powders were prepared (i) either from commercial oxides by a classical ceramic way (solid state reaction process) (ii) or by a wet chemical route. In that case, a carbonate precursor was synthesized by a coprecipitation method from a mixed solution of scandium and ytterbium nitrates using aqueous ammonium hydrogen carbonate as a precipitating agent. The Yb:Sc2O3 powder was obtained after heat treatment of the carbonate precursor at 700 degrees C. The powders prepared by these two methods were characterized by BET measurements, XRD and SEM and their sintering behaviour was investigated by dilatometry. The effects of a grinding step and of the addition of a sintering aid addition (TEOS) were investigated. The microstructures of the vacuum sintered materials were observed by scanning electron microscopy. Electron probe microanalysis allowed to characterize the repartition of the dopant Yb3+ in the Sc2O3 matrix. Translucent ceramics with densities close to 99% were obtained in the best conditions. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:734 / 739
页数:6
相关论文
共 16 条
[1]   Overview of the best Yb3+-doped laser crystals [J].
Brenier, A ;
Boulon, G .
JOURNAL OF ALLOYS AND COMPOUNDS, 2001, 323 :210-213
[2]   Fabrication of transparent yttria ceramics through the synthesis of yttrium hydroxide at low temperature and doping by sulfate ions [J].
Ikegami, T ;
Mori, T ;
Yajima, Y ;
Takenouchi, S ;
Misawa, T ;
Moriyoshi, Y .
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1999, 107 (03) :297-299
[3]   Characteristics and sintering behavior of yttria powders synthesized by the combustion process [J].
Kim, WJ ;
Park, JY ;
Oh, SJ ;
Kim, YS ;
Hong, GW ;
Kuk, IH .
JOURNAL OF MATERIALS SCIENCE LETTERS, 1999, 18 (05) :411-413
[4]   Fabrication of transparent, sintered Sc2O3 ceramics [J].
Li, JG ;
Ikegami, T ;
Mori, T .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (04) :817-821
[5]   Wet-chemical routes leading to scandia nanopowders [J].
Li, JG ;
Ikegami, T ;
Mori, T ;
Yajima, Y .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2003, 86 (09) :1493-1499
[6]   Synthesis of Nd3+ doped nano-crystalline yttrium aluminum garnet (YAG) powders leading to transparent ceramic [J].
Li, Xia ;
Li, Qiang ;
Wang, Jiyang ;
Yang, Shunliang ;
Liu, Hong .
OPTICAL MATERIALS, 2007, 29 (05) :528-531
[7]   Yb3+:Sc2O3 ceramic laser [J].
Lu, J ;
Bisson, JF ;
Takaichi, K ;
Uematsu, T ;
Shirakawa, A ;
Musha, M ;
Ueda, K ;
Yagi, H ;
Yanagitani, T ;
Kaminskii, AA .
APPLIED PHYSICS LETTERS, 2003, 83 (06) :1101-1103
[8]   Comparison of two different precipitation routes leading to Yb doped Y2O3 nano-particles [J].
Mouzon, Johanne ;
Nordell, Patricia ;
Thomas, Adrien ;
Oden, Magnus .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2007, 27 (04) :1991-1998
[9]   Rare-earth-doped sesquioxides [J].
Petermann, K ;
Huber, G ;
Fornasiero, L ;
Kuch, S ;
Mix, E ;
Peters, V ;
Basun, SA .
JOURNAL OF LUMINESCENCE, 2000, 87-9 (87) :973-975
[10]   Nanostructured yttria powders via gel combustion [J].
Roy, S ;
Sigmund, W ;
Aldinger, F .
JOURNAL OF MATERIALS RESEARCH, 1999, 14 (04) :1524-1531