Indentation properties of plasma sprayed Al2O3-13% TiO2 nanocoatings

被引:35
|
作者
Rodriguez, J. [1 ]
Rico, A. [1 ]
Otero, E. [1 ]
Rainforth, W. M. [2 ]
机构
[1] Univ Rey Juan Carlos, Dept Ciencia & Ingn Mat, Madrid 28933, Spain
[2] Univ Sheffield, Dept Mat Engn, Sheffield S1 3JD, S Yorkshire, England
关键词
Ceramic coatings; Plasma spraying; Nanoindentation; Nanostructure; ALUMINA-TITANIA COATINGS; MECHANICAL-PROPERTIES; WEAR-RESISTANCE; MICROSTRUCTURE; CERAMICS; BEHAVIOR; HARDNESS;
D O I
10.1016/j.actamat.2009.03.020
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Young's modulus and hardness were determined by depth sensing indentation in plasma sprayed Al2O3-13% TiO2 nanocoatings. Results were compared to conventional coatings and the relevance of the nanostructure was analyzed. An indentation size effect was observed. Data provided by indentation tests at different maximum loads were used to estimate size-independent hardness and elastic modulus. Enhanced properties were observed in the nanostructured coating compared to the conventional one. Partially melted zones in the nanocoating, which act as reinforcements in the ceramic matrix composite, are likely responsible for the enhancement. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:3148 / 3156
页数:9
相关论文
共 50 条
  • [41] Indentation fracture behavior of plasma-sprayed nanostructured Al2O3-13wt.%TiO2 coatings
    Luo, H
    Goberman, D
    Shaw, L
    Gell, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 346 (1-2): : 237 - 245
  • [42] Laser surface remelting of plasma sprayed nanostructured Al2O3-13wt%TiO2 coatings on titanium alloy
    Wang, Y.
    Li, C. G.
    Tian, W.
    Yang, Y.
    APPLIED SURFACE SCIENCE, 2009, 255 (20) : 8603 - 8610
  • [43] Microstructural characteristics of plasma-sprayed MCrAlY/Al2O3-13 wt.%TiO2 coating prepared by induction heating-assisted laser remelting
    Zhang, Peipei
    Wang, Dongsheng
    MATERIALS RESEARCH EXPRESS, 2020, 7 (09)
  • [44] Effect of laser remelting on microstructure and wear resistance of plasma sprayed Al2O3-40%TiO2 coating
    Yang, Ke
    Li, Jiaqi
    Wang, Qiuyu
    Li, Zhenyu
    Jiang, Yongfeng
    Bao, Yefeng
    WEAR, 2019, 426 : 314 - 318
  • [45] Characterisations Of Al2O3-13% Wt TiO2 Deposition On Mild Steel Via Plasma Spray Method
    Yusoff, N. H.
    Ghazali, M. J.
    Isa, M. C.
    Daud, A. R.
    Muchtar, A.
    Forghani, S.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 1565 - +
  • [46] Wear resistance of plasma-sprayed Al2O3-TiO2 nanocoatings
    Ahn, Jeehoon
    Song, Eun Pil
    Lee, Sunghak
    Kim, Nack J.
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 641 - +
  • [47] Thermal-shock resistance of plasma sprayed Al2O3-13 wt%TiO2 coating evaluated by residual strength method
    Wang, Miqi
    Zhou, Zehua
    Yi, Yu
    Wang, Zehua
    SURFACE & COATINGS TECHNOLOGY, 2019, 375 : 888 - 893
  • [48] Protection Performance of Plasma Sprayed Al2O3-13 wt%TiO2 Coating Sealed with an Organic-inorganic Hybrid Agent
    Zhang Kaicheng
    Zhou Zehua
    Deng Yong
    Wang Guangyu
    Wang Zehua
    Wu Lintao
    Yang Guangheng
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2022, 37 (03): : 331 - 335
  • [49] Microstructural Characteristics and Wear Performance of Plasma Sprayed Al2O3-13 wt. % TiO2 Coating on the Surface of Extrusion Wheel
    ZHANG Xue-fei
    REN Li-min
    InternationalJournalofPlantEngineeringandManagement, 2013, 18 (03) : 165 - 172
  • [50] Effects of powder size and metallic bonding layer on corrosion behaviour of plasma-sprayed Al2O3-13% TiO2 coated mild steel in fresh tropical seawater
    Yusoff, N. H. N.
    Ghazali, M. J.
    Isa, M. C.
    Daud, A. R.
    Muchtar, A.
    CERAMICS INTERNATIONAL, 2013, 39 (03) : 2527 - 2533