Metallurgical investigations of pulsed Nd:YAG laser welding of AISI 321 and AISI 630 stainless steels

被引：57
|
作者：
Mousavi, S. A. A. Akbari [1 ]
Sufizadeh, A. R. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Univ Coll Engn, Tehran, Iran
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 08期
关键词：
Welding; Metallography; Microstructure;
D O I：
10.1016/j.matdes.2008.11.026
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, pulsed Nd:YAG laser welding of 321 austenitic stainless steel and 630 (17-4PH) precipitation hardening stainless steel is being studied. The joints had a circular geometry and butt welded. Studies were focused on the effects of laser power, beam diameter and pulse duration on the depth and width of the welds. Microstructures of the welded joints were investigated by optical and scanning electron microscopy. The results show that both weld depth and weld width increase with voltage. In addition, the pulse duration have bilateral effects on the weld bead depth and width. Very fine cellular and dendritic structures were achieved in the weld zone. The martensitic microstructure was achieved in the weld metal adjacent to the AISI 630 side and austenitic-ferritic microstructure was obtained near the AISI 321 side. The microhardness tests showed that the maximum hardness was produced for the 630 stainless steel side and the minimum hardness was occurred for the 321 stainless steel side. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3150 / 3157
页数：8
相关论文
共 50 条
  • [1] The Effects of Position of the Laser Beam on the Pulsed Nd: YAG Laser Weld Microstructure of AISI 630 and AISI 321 Stainless Steels
    Mousavi, S. A. A. Akbari
    Sufizadeh, A. R.
    MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 424 - 429
  • [2] Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels
    Berretta, Jose Roberto
    de Rossi, Wagner
    Martins das Neves, Mauricio David
    de Almeida, Ivan Alves
    Vielra Junior, Nilson Dias
    OPTICS AND LASERS IN ENGINEERING, 2007, 45 (09) : 960 - 966
  • [3] Investigations on the effects of process parameters for Nd:YAG pulsed laser welding of 630 and 321 stainless steels
    School of Metallurgy and Materials Engineering, University College of Engineering, University of Tehran, P.O.Box: 11365-4563, Iran
    Weld. World, 2008, SPEC. ISS. (467-472):
  • [4] Comparative study of pulsed Nd:YAG laser welding of AISI 304 and AISI 316 stainless steels
    Kumar, Nikhil
    Mukherjee, Manidipto
    Bandyopadhyay, Asish
    OPTICS AND LASER TECHNOLOGY, 2017, 88 : 24 - 39
  • [5] Investigations on the Microstructure and the Fracture Surface of Pulsed Nd: YAG Laser Welding of AISI 304 Stainless Steel
    Mousavi, S. A. A. Akbari
    Garehdaghi, A.
    MATERIALS AND MANUFACTURING TECHNOLOGIES XIV, 2012, 445 : 418 - 423
  • [6] Metallurgical investigations of laser welding of AISI 304 stainless steel
    Mousavi, S. A. A. Akbari
    Gharedaghi, A.
    Mastoori, M.
    ADVANCED WELDING AND MICRO JOINING / PACKAGING FOR THE 21ST CENTURY, 2008, 580-582 : 41 - 44
  • [7] Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 Steel
    Shamsudin, Shazarel
    Yoon, Phoon Chee
    MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 402 - 408
  • [8] Investigation of Nd:YAG pulsed laser dissimilar welding of AISI 4340 and AISI 316L stainless steels on weld geometry and mechanical properties
    Sufizadeh, A. R.
    Mousavi, S. A. A. Akbari
    MECHANICS & INDUSTRY, 2017, 18 (05)
  • [9] Experimental investigations of Nd: YAG laser welding of 630 and 321 stainless steel and their effects on process parameters
    Mousavi, S. A. A. Akbari
    Sufizadeh, A. R.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 384 - 391
  • [10] Analysis of pulsed Nd:YAG laser welding of AISI 304 steel
    Kwanwoo Kim
    Jungkil Lee
    Haeyong Cho
    Journal of Mechanical Science and Technology, 2010, 24 : 2253 - 2259
12345