Taguchi analysis on cutting force and surface roughness in turning MDN350 steel

被引：22

作者：

Kosaraju, Satyanarayana ^{[1
]}

Chandraker, Satyam ^{[2
]}

机构：

[1] Gokaraju Rangaraju Inst Engn & Technol, Hyderabad 500090, Andhra Pradesh, India

[2] Natl Inst Technol, Warangal 506004, Andhra Pradesh, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2015年 / 2卷 / 4-5期

关键词：

Maraging steel; Machining; Taguchi Method; ANOVA; FINISH; TOOLS; HARDNESS;

D O I：

10.1016/j.matpr.2015.07.313

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Maraging steels are evoked tremendous interest due to its extraordinary combination of structural strength and fracture toughness, at the same time ready to weld and heat-treated. Therefore, in the present study, an attempt has been made to investigate the effect of process parameters on performance characteristics in finish hard turning of MDN350 steel using cemented carbide tool and there by optimization of turning of MDN350 steel by taguchi method. The cutting speed, feed and depth of cut were used as the process parameters whereas the cutting force and surface roughness ware selected as performance characteristics. The L9 orthogonal array based on design of experiments was used to conduct experiments. The degree of influence of each process parameter on individual performance characteristic was obtained from Analysis of variance. The cutting speed was identified as the most influential process parameter on cutting force and feed was identified as the most influential process parameter on surface roughness. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：3388 / 3393

页数：6

共 13 条

[1] On machining of hardened AISI D2 steel with PCBN tools [J].

Arsecularatne, JA ;

Zhang, LC ;

Montross, C ;

Mathew, P .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 171 (02) :244-252

[2] Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel [J].

Bartarya, Gaurav ;

Choudhury, S. K. .

FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 :651-656

[3] Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools [J].

Benga, GC ;

Abrao, AM .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 143 :237-241

[4] Cutting forces and surface finish when machining medium hardness steel using CBN tools [J].

Chen, WY .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (03) :455-466

[5] Development of empirical models for surface roughness prediction in finish turning [J].

Wang X. ;

Feng C.X. .

The International Journal of Advanced Manufacturing Technology, 2002, 20 (5) :348-356

[6]

HACI S, 2006, INT J MACH TOOL MANU, V46, P132

[7] A dynamometer design and its construction for milling operation [J].

Korkut, I .

MATERIALS & DESIGN, 2003, 24 (08) :631-637

[8]

Kosaraju S., 2012, INT J MECH IND ENG I, V1, P55

[9]

Lin ZC, 2006, INT J COMPUT APPL T, V25, P30, DOI 10.1504/IJCAT.2006.008667

[10] Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel [J].

Özel, T ;

Hsu, TK ;

Zeren, E .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 25 (3-4) :262-269

← 1 2 →