Effect of shot peening on surface properties of Al7075 hybrid aluminum metal matrix composites

被引：5

作者：

Sasikumar, K. S. K. ^{[1
]}

Dineshkumar, K. ^{[1
]}

Deeban, K. ^{[1
]}

Sambathkumar, M. ^{[1
]}

Saravanan, N. ^{[2
]}

机构：

[1] Kongu Engn Coll, Dept Mech Engn, Perundurai 638060, India

[2] KS Rangasamy Coll Technol, Dept Mechatron Engn, Tiruchengode 637215, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 33卷

关键词：

AL7075 aluminium alloy; Shot peening; Micro hardness; Surface roughness; MECHANICAL-PROPERTIES; WEAR BEHAVIOR; SPEED;

D O I：

10.1016/j.matpr.2020.02.676

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Various fields of engineering such as automobile, aerospace and construction industries are employs Aluminum alloys and its composites due to its high strength to weight ratio. But they possess poor wear resistance due to low hardness. In this research, shot peening treatment is used to enhance the wear resistance ability of the composites. Micro hardness and surface roughness of AL7075 Hybrid metal matrix composites are examined after shot peening treatment. For this, the aluminum alloy specimens are subjected to shot peening for 30, 60, 90, 120 and 150 s time. The results reveal that the shot peening treatment increases micro -hardness and surface roughness up to 90 s. The specimen after 120 s peening demonstrates the marginal improvement in micro hardness and slight reduction in surface roughness. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：2792 / 2794

页数：3

共 50 条

[41] Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites [J].

Ramadoss, N. ;

Pazhanivel, K. ;

Ganeshkumar, A. ;

Arivanandhan, M. .

INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (01) :499-514

[42] Surface treatment of Al7075 Matrix by TiC particles via hybrid ball milling and tungsten inert gas cladding [J].

Toozandehjani, M. ;

Ostovan, F. ;

Shafiei, E. ;

Jamaludin, K. R. ;

Amrin, A. ;

Hasanzadeh, E. .

METALLURGIA ITALIANA, 2020, (06) :21-30

[43] Effect of cryogenic treatment on the performance of mechanical properties of Al 7075-TiB2 metal matrix composites [J].

Ranganath, B. M. ;

Rudresh, B. M. .

MATERIALS TODAY-PROCEEDINGS, 2021, 46 :5078-5084

[44] Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites [J].

N. Ramadoss ;

K. Pazhanivel ;

A. Ganeshkumar ;

M. Arivanandhan .

International Journal of Metalcasting, 2023, 17 :499-514

[45] Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy [J].

Rouzbehani, R. ;

Kokabi, A. H. ;

Sabet, H. ;

Paidar, M. ;

Ojo, O. O. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 262 :239-256

[46] The effect of shot-peening on the fatigue life of unidirectional titanium-based metal matrix composites [J].

Solis-Romero, J ;

Rios, ERD ;

Rodopoulos, CA ;

Yates, JR ;

Godfrey, SP .

ADVANCED COMPOSITES LETTERS, 2002, 11 (05) :245-251

[47] Machinability analysis on Al7075 matrix composites reinforced by nano-silicon carbide, boron carbide, graphene and MWCNT [J].

J. P. Ajithkumar ;

M. Anthony Xavior .

Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45

[48] Parameters Optimization for End Milling of Al7075–ZrO2–C Metal Matrix Composites Using GRA and ANOVA [J].

M. Bhuvanesh Kumar ;

P. Sathiya ;

R. Parameshwaran .

Transactions of the Indian Institute of Metals, 2020, 73 :2931-2946

[49] Machinability analysis on Al7075 matrix composites reinforced by nano-silicon carbide, boron carbide, graphene and MWCNT [J].

Ajithkumar, J. P. ;

Xavior, M. Anthony .

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2023, 45 (10)

[50] Investigations for Surface Hardness of Aluminum Matrix Composites with Hybrid Reinforcement [J].

Singh, Swarndeep ;

Singh, Rupinder ;

Gill, Simranpreet Singh .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (01) :181-190

← 1 2 3 4 5 →