Effect of shot peening on surface properties of Al7075 hybrid aluminum metal matrix composites

被引：5

作者：

Sasikumar, K. S. K. ^{[1
]}

Dineshkumar, K. ^{[1
]}

Deeban, K. ^{[1
]}

Sambathkumar, M. ^{[1
]}

Saravanan, N. ^{[2
]}

机构：

[1] Kongu Engn Coll, Dept Mech Engn, Perundurai 638060, India

[2] KS Rangasamy Coll Technol, Dept Mechatron Engn, Tiruchengode 637215, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 33卷

关键词：

AL7075 aluminium alloy; Shot peening; Micro hardness; Surface roughness; MECHANICAL-PROPERTIES; WEAR BEHAVIOR; SPEED;

D O I：

10.1016/j.matpr.2020.02.676

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Various fields of engineering such as automobile, aerospace and construction industries are employs Aluminum alloys and its composites due to its high strength to weight ratio. But they possess poor wear resistance due to low hardness. In this research, shot peening treatment is used to enhance the wear resistance ability of the composites. Micro hardness and surface roughness of AL7075 Hybrid metal matrix composites are examined after shot peening treatment. For this, the aluminum alloy specimens are subjected to shot peening for 30, 60, 90, 120 and 150 s time. The results reveal that the shot peening treatment increases micro -hardness and surface roughness up to 90 s. The specimen after 120 s peening demonstrates the marginal improvement in micro hardness and slight reduction in surface roughness. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：2792 / 2794

页数：3

共 50 条

[21] The effects of laser peening and shot peening on mechanical properties in friction stir welded 7075-T7351 Aluminum
Hatamleh, Omar
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2008, 17 (05) : 688 - 694
[22] A Hybrid Design of Experiment Approach in Analyzing the Electrical Discharge Machining Influence on Stir Cast Al7075/B4C Metal Matrix Composites
Mohankumar, Velusamy
Kapilan, Sunderraj
Karthik, Aruchamy
Bhuvaneshwaran, Mylsamy
Santulli, Carlo
Kumar, Durairaj Thresh
Palanisamy, Sivasubramanian
Fragassa, Cristiano
METALS, 2024, 14 (02)
[23] Characterization of Al-7075 metal matrix composites: a review
Imran, Mohammed
Khan, A. R. Anwar
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (03): : 3347 - 3356
[24] Investigation on the effect of SiC and TiB2 ceramic particles on mechanical and tribological properties of Al7075 hybrid metal matrix composites prepared through conventional stir casting technique
Manoj, Mariadhas
Jinu, Gowthami Thankachi Raghuvaran
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
[25] Effect of shot peening residual stresses and surface roughness on fretting fatigue strength of Al 7075-T651
Martin, Vicente
Vazquez, Jesus
Navarro, Carlos
Dominguez, Jaime
TRIBOLOGY INTERNATIONAL, 2020, 142
[26] Enhancing surface layer properties of an aircraft aluminum alloy by shot peening using response surface methodology
Nam, Yong-Seog
Jeong, Yoo-In
Shin, Byung-Cheol
Byun, Jai-Hyun
MATERIALS & DESIGN, 2015, 83 : 566 - 576
[27] Effect of joint design on mechanical properties of AL7075 weldment
Li, LJ
Orme, K
Yu, WB
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2005, 14 (03) : 322 - 326
[28] Experimental Investigations on the Development of Hybrid Metal Matrix Composite of Al7075 on Microstructural, Mechanical, and Dry Sliding Aspects
Lovevanshi, Bhagwan Singh
Soni, P. K.
Dixit, Savita
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2024, 146 (05):
[29] MACHINABILITY STUDY ON Al7075/Al2O3-SiC HYBRID COMPOSITES
Mukundaiah, Ravikumar
Reddappa, H. N.
Suresh, R.
Rammohan, Y. S.
Babu, E. R.
Nagaraja, C. R.
METALLURGICAL & MATERIALS ENGINEERING, 2022, 28 (01) : 61 - 77
[30] Mechanical behavior and characterization of Al7075 reinforced with Al2O3 and TiC Hybrid metal matrix composite
Radha, A.
Prabu, D. Antony
Jayakumar, KS.
Sankaralingam, T.
Selvam, B.
Balaharsha, S.
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 876 - 881

← 1 2 3 4 5 →