Investigation on mechanical properties of cold sprayed Ni-Ni3Al composites

被引:12
作者
Azarmi, F. [1 ]
Tangpong, X. W. [1 ]
Chandanayaka, T. [1 ]
机构
[1] N Dakota State Univ, Dept Mech Engn, Fargo, ND 58105 USA
关键词
Cold spraying; Intermetallics; Metal matrix composites; Mechanical properties; Microstructural characterisation; Powder metallurgy;
D O I
10.1179/1743294414Y.0000000384
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This study investigates the microstructural and mechanical characteristics of the Ni-Ni3Al composites fabricated by cold spraying. Investigations were conducted on pure Ni samples as well as composites consisting of 80 vol.-%Ni and 20 vol.-%Ni3Al. The results of a variety of hardness tests such as Vickers, Knoop, and nano-indentation are reported in this study. Furthermore, this study examines the application of analytical models to calculate the elastic modulus of coating materials from hardness test results. The validity of the obtained results was examined by performing impulse excitation (resonant frequency) test on all samples. A similar study was also performed on the same materials produced by the powder metallurgy (P/M) technique for the purpose of comparison. The reinforced samples exhibited better mechanical properties compared to the unreinforced ones regardless of the fabrication technique. The cold sprayed sample exhibited higher strength and density compared to the P/M processed ones.
引用
收藏
页码:832 / 839
页数:8
相关论文
共 23 条
[1]   Synthesis and mechanical properties of nanocrystalline Ni coatings produced by cold gas dynamic spraying [J].
Ajdelsztajn, L. ;
Jodoin, B. ;
Schoenung, J. M. .
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4) :1166-1172
[2]  
Angelo P.C., 2008, Powder Metallurgy: Science, Technology and Applications
[3]   On Parameter Selection in Cold Spraying [J].
Assadi, H. ;
Schmidt, T. ;
Richter, H. ;
Kliemann, J. -O. ;
Binder, K. ;
Gaertner, F. ;
Klassen, T. ;
Kreye, H. .
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2011, 20 (06) :1161-1176
[4]   Effect of particle size on the microstructure and properties of kinetic sprayed nickel coatings [J].
Bae, Gyuyeol ;
Kang, Kicheol ;
Na, Hyuntaek ;
Kim, Jay-Jung ;
Lee, Changhee .
SURFACE & COATINGS TECHNOLOGY, 2010, 204 (20) :3326-3335
[5]  
Bell JAE, 1996, PROCESSING, PROPERTIES, AND APPLICATIONS OF CAST METAL MATRIX COMPOSITES, P247
[6]  
Bratukhin A. G., 1994, CHEM PETROL ENG, V4, P459
[7]  
Davis J., 2004, Handbook of Thermal Spray Technology, P77
[8]  
Davis J.R., 2000, ASM HDB
[9]  
Davis J. R., 2000, NICKEL COBALT THEIR, P331
[10]  
Everett R.K., 1991, METAL MATRIX COMPOSI, P103