Kinetics of curing process in carbon/epoxy nano-composites

被引：10
作者：
Abenojar, J. [1 ,2 ]
del Real, J. C. [2 ]
Ballesteros, Y. [2 ]
Martinez, M. A. [1 ]
机构：
[1] Univ Carlos III Madrid, Mat Sci & Engn Dept, Alvaro Alonso Barba Inst, Av Univ 30, Leganes 28911, Spain
[2] Univ Pontificia Comillas, Mech Engn Dept, Technol Res Inst, C Alberto Aguilera 25, Madrid 28015, Spain
来源：
2018 5TH GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM 2018) | 2018年 / 369卷
关键词：
EPOXY-RESIN; ADHESIVE JOINTS; CURE KINETICS; MECHANISM; NANOCOMPOSITES; WEAR;
D O I：
10.1088/1757-899X/369/1/012011
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Epoxy resins are routinely used as adhesives, coatings, encapsulates, casting materials, and as matrix in composites. Their high crosslinking supposes too much rigidity, resulting in low toughness. Nano-filled addition could modify toughness, but it could also modify the curing process of the resin. Quality requirements of nano-composite (NC) imply a control of their curing process to ensure the mechanical properties of the material. Therefore, the aim of this work is to study the influence of carbon-based nano-fillers in the kinetics of curing of an epoxy resin. Three different methods are used in this work, Kissinger, Kamal and Model Free (MFK). The methods are complementary and provide information on the curing process of the nano-composites.
引用
收藏
页数：7
相关论文
共 24 条
[1]   Erosion-wear, mechanical and thermal properties of silica filled epoxy nanocomposites [J].
Abenojar, J. ;
Tutor, J. ;
Ballesteros, Y. ;
del Real, J. C. ;
Martinez, M. A. .
COMPOSITES PART B-ENGINEERING, 2017, 120 :42-53
[2]   Polymerization kinetics of boron carbide/epoxy composites [J].
Abenojar, J. ;
Encinas, N. ;
del Real, J. C. ;
Martinez, M. A. .
THERMOCHIMICA ACTA, 2014, 575 :144-150
[3]   Epoxy Composite Reinforced with Nano and Micro SiC Particles: Curing Kinetics and Mechanical Properties [J].
Abenojar, J. ;
Martinez, M. A. ;
Pantoja, M. ;
Velasco, F. ;
Del Real, J. C. .
JOURNAL OF ADHESION, 2012, 88 (4-6) :418-434
[4]   Effect of Boron Carbide Filler on the Curing and Mechanical Properties of an Epoxy Resin [J].
Abenojar, J. ;
Martinez, M. A. ;
Velasco, F. ;
Pascual-Sanchez, V. ;
Martin-Martinez, J. M. .
JOURNAL OF ADHESION, 2009, 85 (4-5) :216-238
[5]   Toughness of a brittle epoxy resin reinforced with micro cork particles: Effect of size, amount and surface treatment [J].
Barbosa, A. Q. ;
da Silva, L. F. M. ;
Abenojar, J. ;
Figueiredo, M. ;
Oechsner, A. .
COMPOSITES PART B-ENGINEERING, 2017, 114 :299-310
[6]   Kinetic analysis and characterization of an epoxy/cork adhesive [J].
Barbosa, A. Q. ;
da Silva, L. F. M. ;
Abenojar, J. ;
del Real, J. C. ;
Paiva, R. M. M. ;
Oechsner, A. .
THERMOCHIMICA ACTA, 2015, 604 :52-60
[7]   Kinetics of degradation and thermal behaviour of branched hepta phenyl POSS/PS nanocomposites [J].
Blanco, Ignazio ;
Bottino, Francesco A. .
POLYMER DEGRADATION AND STABILITY, 2016, 129 :374-379
[8]   Functionally graded adhesive joints by graded mixing of nanoparticles [J].
Carbas, R. J. C. ;
da Silva, L. F. M. ;
Andres, L. F. S. .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 76 :30-37
[9]  
Chang R., 2005, Physical Chemistry for the Biosciences
[10]   Influence of plasma treatment on the adhesion between a polymeric matrix and natural fibres [J].
Enciso, B. ;
Abenojar, J. ;
Martinez, M. A. .
CELLULOSE, 2017, 24 (04) :1791-1801
123