Improvement of Fukuzono's Model for Time Prediction of an Onset of a Rainfall-Induced Landslide

被引:6
作者
Iwata, Naoki [1 ]
Sasahara, Katsuo [2 ]
Watanabe, Satoshi [3 ]
机构
[1] Chuden Engn Consultants Co Ltd, Nucl Project Dept, Hiroshima 7348510, Japan
[2] Kochi Univ, Res & Educ Fac, Kochi 7838502, Japan
[3] Fukken Co Ltd, Dept Disaster, Hiroshima 7320052, Japan
来源
ADVANCING CULTURE OF LIVING WITH LANDSLIDES, VOL 3: ADVANCES IN LANDSLIDE TECHNOLOGY | 2017年
关键词
Monitoring; Surface displacement; Slope failure; Time-prediction; Fukuzono model; Accuracy of the prediction; FAILURE;
D O I
10.1007/978-3-319-53487-9_11
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Time-prediction methods based on monitoring the displacement of a slope are effective for the prevention of sediment-related disasters. Several models have been proposed to predict the failure time of a slope based on the creep theory of soil, which describes the accelerating surface displacements that precede slope failure. Fukuzono proposed an inverse-velocity method to predict the failure time. Fukuzono's method has been widely adopted in practice because of its simplicity. His method can only be applied to the period when the surface displacement accelerates. However, the actual displacement of the slope is complicated due to the change in the rainfall intensity and the inhomogeneity of the surface layer, and it is not easy to specify the period when the surface displacement accelerates. In this study, we predicted the failure time of a sandy model slope under artificial rainfall using three methods based on Fukuzono's model using all data from the start of monitoring onwards. The results showed that using all monitoring data results decreased the prediction accuracy and that the accuracy of the prediction improves if the period in which the acceleration of the surface displacement continuously increased could be extracted. Therefore, we extracted the period in which acceleration of the surface displacement continuously increased using a moving average method and predicted the failure time again. This resulted in improved prediction accuracy and the dispersion of the predicted results decreased. This reveals that predictions that only use the data of the period in which the acceleration of the surface displacement is positive lead to improvements in the precision. Moreover, the accuracy of the prediction improves by using regression analyses, such as the least squares method, in order to reduce the influence of velocity fluctuations of the surface displacement.
引用
收藏
页码:103 / 110
页数:8
相关论文
共 8 条
  • [1] Bozzano F, 2012, LANDSLIDES ENG SLOPE, P1465
  • [2] Failure forecast for large rock slides by surface displacement measurements
    Crosta, GB
    Agliardi, F
    [J]. CANADIAN GEOTECHNICAL JOURNAL, 2003, 40 (01) : 176 - 191
  • [3] Fukuzono T, 1990, 46 NAT RES I SCI DIS, P46
  • [4] Fukuzono T., 1985, A new method for predicting the failure time of a slope, P145, DOI DOI 10.3313/JLS1964.22.2_8
  • [5] Forecasting potential rock slope failure in open pit mines using the inverse-velocity method
    Rose, N. D.
    Hungr, O.
    [J]. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2007, 44 (02) : 308 - 320
  • [6] Saito M, 1973, U.S.S.R., V4, P325
  • [7] Saito M., 1965, P 6 INT C SOIL MECH, P537, DOI DOI 10.1201/9780203885284-115
  • [8] Sasahara K, 2016, JPN GEOTECHN J, V11, P69