On the development of a collaborative robotic system for industrial coating cells

For remaining competitive in the current industrial manufacturing markets, coating companies need to implement flexible production systems for dealing with mass customization and mass production workflows. The introduction of robotic manipulators capable of mimicking with accuracy the motions executed by highly skilled technicians is an important factor in enabling coating companies to cope with high customization. However, there are some limitations associated with the usage of a fully automated system for coating applications, especially when considering customized products of large dimensions and complex geometry. This paper addresses the development of a collaborative coating cell to increase the flexibility and efficiency of coating processes. The robot trajectory is taught with an intuitive programming by demonstration system, in which an icosahedron marker with multicoloured LEDs is attached to the coating tool for tracking its trajectories using a stereoscopic vision system. For avoiding the construction of fixtures and allowing the operator to freely place products within the coating work cell, a modular 3D perception system was developed, relying on principal component analysis for performing the initial point cloud alignment and on the iterative closest point algorithm for 6 DoF pose estimation. Furthermore, to enable safe and intuitive human-robot collaboration, a non-intrusive zone monitoring safety system was employed to track the position of the operator in the cell.