Continuous chiral separation of 2-phenylbutyric acid by liquid-liquid extraction in centrifugal contactor separators

被引:19
作者
Xu, Weifeng [1 ]
Dai, Guilin [1 ]
Tang, Kewen [1 ]
Zhang, Panliang [1 ]
Xiong, Biquan [1 ]
Liu, Yu [1 ]
机构
[1] Hunan Inst Sci & Technol, Dept Chem & Chem Engn, Yueyang 414006, Hunan, Peoples R China
关键词
Multistage equilibrium model; Simulation; Optimization; Enantioselective liquid-liquid extraction; 2-phenylbutyric acid; MOVING-BED CHROMATOGRAPHY; MEMBRANE TECHNOLOGY; ENANTIOMERS; OPTIMIZATION;
D O I
10.1016/j.seppur.2017.01.063
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The continuous enantioselective liquid-liquid extraction of 2-phenylbutyric acid (2-PBA) enantiomers by hydroxyethyl-p-cyclodextrin (HE -beta-CD) in aqueous phase using centrifugal contactor separators (CCSs) was studied. Purity (enantiomeric excess, ee) and yield (Y) were used to evaluate the process performance. A multistage equilibrium model was established on the basis of single-stage model for chiral extraction of 2-PBA enantiomers and the law of mass conservation. To verify the model, factors that influencing purity and yield were studied, such as rotational speed of CCSs, volume ratio of extract phase to wash phase (W/O), volume ratio of extract phase to feed phase (W/F), extractant concentration, pH value and number of stages. Results indicated that model predictions were in good accordance with experimental results. The model was applied to predict and optimize the symmetrical separation of 2-PBA enantiomers. The optimal condition was obtained as follows, rotational speed of 3000 rpm, W/O of 4.0, pH of 3.00 and HE-beta-CD concentration of 0.05 mol/L, where equal enantiomeric excess (ee(eq)) can reach up to 42%. The simulated results by the model reveal that the minimum number of stages for eeeq > 97% and eeeq > 99% is 60 and 82, respectively. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:53 / 60
页数:8
相关论文
共 23 条
  • [1] Practical use of continuous processing in developing and scaling up laboratory processes
    Anderson, NG
    [J]. ORGANIC PROCESS RESEARCH & DEVELOPMENT, 2001, 5 (06) : 613 - 621
  • [2] Mass transfer and hydrodynamic studies in a 50 mm diameter centrifugal extractor
    Ayyappa, S. V. N.
    Balamurugan, M.
    Kumar, Shekhar
    Mudali, U. Kamachi
    [J]. CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2016, 105 : 30 - 37
  • [3] New trends in extraction, identification and quantification of artemisinin and its derivatives
    Christen, P
    Veuthey, JL
    [J]. CURRENT MEDICINAL CHEMISTRY, 2001, 8 (15) : 1827 - 1839
  • [4] Enantioselective chromatography as a powerful alternative for the preparation of drug enantiomers
    Francotte, ER
    [J]. JOURNAL OF CHROMATOGRAPHY A, 2001, 906 (1-2) : 379 - 397
  • [5] Enantioseparation of Chiral Aromatic Acids in Process Intensified Liquid-Liquid Extraction Columns
    Holbach, Alexander
    Godde, Julia
    Mahendrarajah, Ramanan
    Kockmann, Norbert
    [J]. AICHE JOURNAL, 2015, 61 (01) : 266 - 276
  • [6] Liquid membrane technology for the separation of racemic mixtures
    Keurentjes, JTF
    Nabuurs, LJWM
    Vegter, EA
    [J]. JOURNAL OF MEMBRANE SCIENCE, 1996, 113 (02) : 351 - 360
  • [7] Liquid-liquid extraction system with microstructured coiled flow inverter and other capillary setups for single-stage extraction applications
    Kurt, Safa Kutup
    Guersel, Iris Vural
    Hessel, Volker
    Nigam, Krishna D. P.
    Kockmann, Norbert
    [J]. CHEMICAL ENGINEERING JOURNAL, 2016, 284 : 764 - 777
  • [8] Design and optimization of coupling a continuously operated reactor with simulated moving bed chromatography
    Lee, Ju Weon
    Horvath, Zoltan
    O'Brien, Alexander G.
    Seeberger, Peter H.
    Seidel-Morgenstern, Andreas
    [J]. CHEMICAL ENGINEERING JOURNAL, 2014, 251 : 355 - 370
  • [9] Recent advances in supported ionic liquid membrane technology
    Lozano, L. J.
    Godinez, C.
    de los Rios, A. P.
    Hernandez-Fernandez, F. J.
    Sanchez-Segado, S.
    Alguacil, F. J.
    [J]. JOURNAL OF MEMBRANE SCIENCE, 2011, 376 (1-2) : 1 - 14
  • [10] Mersmann A, 1995, DRYING TECHNOL, V13, P1037, DOI DOI 10.1080/07373939508917003