Preparation of CTA-based polymer inclusion membrane using calix[4]arene derivative as a carrier for Cr(VI) transport

In this work, the transport of Cr(VI) ions from an aqueous donor phase solution to an acceptor phase that contained an acetic acid/ammonium acetate buffer at pH 5 through a polymer inclusion membrane (PIM) containing p-tert-butylcalix[4] arene amine derivative as carrier was studied. The Cr(VI) passed through a PIM comprised of cellulose triacetate as a support and 2-NPOE as a plasticizer. The transport efficiency of Cr(VI) was studied under various experimental conditions, such as effect of carrier concentration, acceptor phase pH, type of plasticizer in the membrane, stirring rate and membrane thickness. The kinetic parameters were calculated as rate constant (k), permeability coefficient (P), and flux (J). The transport efficiency of Cr(VI) was observed to be 95.07 % after 10 h under optimized conditions. The prepared PIM was characterized with Fourier transform infrared spectroscopy and the atomic force microscopy techniques as well as with contact angle measurements. This is an effective method for the removal of Cr(VI) which is toxic for human body and environment from the waste water.