Effect of rolling process on fatigue performance of stir zone of AA6061-T6 doube-side friction stir welding joint

被引：4

作者：

Du, Chengchao ^{[1
]}

Pan, Qiuhong ^{[1
]}

Chen, Shujin ^{[2
]}

Tian, Shuang ^{[3
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China

[2] Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang, Jiangsu, Peoples R China

[3] Southeast Univ, Sch Mat Sci & Engn, Nanjing, Peoples R China

来源：

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2021年 / 44卷 / 03期

关键词：

fatigue; fracture; friction stir welding; lamellar structure; rolling; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; ULTRASONIC VIBRATIONS; CRACK INITIATION; GRAIN ROTATION; MICROSTRUCTURE; BEHAVIOR; SURFACE; STRESS; GROWTH;

D O I：

10.1111/ffe.13391

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Stir zone (SZ) of AA6061-T6 double-side friction stir welding (DS-FSW) joint with a thickness of 6 mm had a poor fatigue performance compared with that of base metal (BM). The rolling process was employed to improve the fatigue performance of SZ. The results showed that rolling process increased the dislocation density in SZ and remarkably enhanced its fatigue performance. The crack initiation played a key role in the fatigue performance of SZ. It relied on the debonding of lamellar structure in SZ. The debonding of lamellar structure depended on the cracking of fine grain layer in lamellar structure.

引用

页码：748 / 761

页数：14

共 50 条

[31] Mechanical Properties Enhancement of Dissimilar AA6061-T6 and AA7075-T651 Friction Stir Welds Coupled with Deep Rolling Process
Kaewkham, Pisit
Nakkiew, Wasawat
Baisukhan, Adirek
MATERIALS, 2022, 15 (18)
[32] Investigation of Mechanical and Microstructural Properties of Welded Specimens of AA6061-T6 Alloy with Friction Stir Welding and Parallel-Friction Stir Welding Methods
Ghiasvand, Amir
Yavari, Mohammad Mahdi
Tomkow, Jacek
Guerrero, John William Grimaldo
Kheradmandan, Hasan
Dorofeev, Aleksei
Memon, Shabbir
Derazkola, Hesamoddin Aghajani
MATERIALS, 2021, 14 (20)
[33] AXIAL FORCE REDUCTION IN FRICTION STIR WELDING OF AA6061-T6 AT RIGHT ANGLE
Imani, Yousef
Guillot, Michel
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B, 2014,
[34] The local strength and toughness for stationary shoulder friction stir weld on AA6061-T6 alloy
Sun, Zhuanping
Yang, Xinqi
Li, Dongxiao
Cui, Lei
MATERIALS CHARACTERIZATION, 2016, 111 : 114 - 121
[35] Evaluating the corrosion behaviour of AA6061-T6 alloy and its friction stir welded joints
Minhas, Navdeep
Sudheer, Lenka
Sharma, Varun
Bhadauria, Shailendra Singh
CANADIAN METALLURGICAL QUARTERLY, 2023, 62 (02) : 244 - 261
[36] Statistical Strength Analysis of Dissimilar AA2024-T6 and AA6061-T6 Friction Stir Welded Joints
Taghiabadi, Reza
Aria, Niloufar
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (03) : 1822 - 1832
[37] Strain rate effect on tensile behavior of AA6061-T6 friction stir welds
Kumar, Indrajeet
Bhattacharya, Anirban
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 35 : 323 - 335
[38] Effect of brass interlayer on microstructure, mechanical and corrosion behaviour of friction stir welded AA6061-T6 alloy
Nagu, Korra
Kumar, Adepu
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (10) : 5412 - 5427
[39] Investigation of AA6061-T6's mechanical and microstructural properties by modification on the tool path in friction stir welding
Jayabalakrishnan, D.
Balasubramanian, M.
Jayaseelan, V
Muthuramalingam, T.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023, 237 (05) : 1740 - 1749
[40] Friction Stir Welding of Dissimilar AA6061-T6 to AZ31B-H24 Alloys
Saldana-Garces, Rocio
Hernandez-Garcia, Daniela
Garcia-Vazquez, Felipe
Jose Gutierrez-Castaneda, Emmanuel
Verdera, David
Deaquino-Lara, Rogelio
SOLDAGEM & INSPECAO, 2020, 25 (25):

← 1 2 3 4 5 →