Creep and LCF Behaviors of Newly Developed Advanced Heat Resistant Austenitic Stainless Steel for A-USC

被引：72

作者：

Chai, Guocai ^{[1
]}

Bostrom, Magnus ^{[1
]}

Olaison, Magnus ^{[1
]}

Forsberg, Urban ^{[1
]}

机构：

[1] Sandvik Mat Technol, SE-81181 Sandviken, Sweden

来源：

6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION | 2013年 / 55卷

关键词：

Heat resistant austenitic stainless steel; superheater; A-USC; creep; fatigue;

D O I：

10.1016/j.proeng.2013.03.248

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Austenitic stainless steel grade UNS S31035 (Sandvik Sanicro (R) 25) has been developed for use in super-heaters and reheaters in the next generation of A-USC power plants. This new grade shows very good resistances to steam oxidation and hot corrosion, and higher creep rupture strength than other austenitic stainless steels available today. This makes it an interesting alternative for super-heaters and reheaters in future high-efficient coal fired boilers. This paper will mainly focus on the study of the creep and LCF behavior of the material at temperatures from 600 degrees C to 750 degrees C by using TOM and ECCI. The mechanisms at different temperatures and loading conditions have been identified. The interactions between dislocations and precipitates and their contribution to the creep rupture strength have been discussed. In this paper, different models have been used to evaluate the long-term creep behavior of the grade. A creep rupture strength near 100MPa at 700 degrees C for 100 000h has been predicted. (C) 2013 The Authors. Published by Elsevier Ltd.

引用

页码：232 / 239

页数：8

共 8 条

[1]

[Anonymous], 2008, GENERIC RECOMMEND IA, VLXII, P5

[2]

Blum R., 2004, P 4 INT C ADV MAT TE, P116

[3]

Chai G., 2011, P ICAS 2011, P56

[4]

Hogberg J., P ASME 2010 PRESS VE

[5]

IEA, 2010, 2009 EN STAT

[6]

Muller F., 2011, 34 FVWFVHT

[7]

Rautio R., 2004, P 4 INT C ADV MAT TE, P274

[8]

Sandström R, 2003, J TEST EVAL, V31, P58

← 1 →