TiAlN/Cu Nanocomposite Coatings Deposited by Filtered Cathodic Arc Ion Plating

被引：32

作者：

Chen, Lei ^{[1
]}

Pei, Zhiliang ^{[1
]}

Xiao, Jinquan ^{[1
]}

Gong, Jun ^{[1
]}

Sun, Chao ^{[1
]}

机构：

[1] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2017年 / 33卷 / 01期

关键词：

TiAlN; TiAlN/Cu; Nanocomposite coating; Filtered cathodic arc ion plating; Co-deposition; CU-N FILMS; MECHANICAL-PROPERTIES; THIN-FILMS; HARD; TITANIUM; GROWTH; MICROSTRUCTURE;

D O I：

10.1016/j.jmst.2016.07.018

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

TiAlN/Cu nanocomposite coatings with Cu concentration of 0-1.4 at.% were deposited on the highspeed steel (HSS) substrates by filtered cathodic arc ion plating technique. The chemical composition, microstructure, morphology, adhesion strength, mechanical and tribological properties of the TiAlN/Cu coatings were characterized and analyzed. The results reveal that the coating structure and properties depend on not only the Cu concentration, but also the deposition condition. The addition of Cu significantly decreases the grain size and weakens the texture in the TiAlN/Cu coatings. With increasing the Cu concentration, the coating hardness decreases slightly from 30.7 GPa of the pure TiAlN coating to 28.5 GPa of the TiAlN/Cu coating with 1.4 at.% Cu. All the TiAlN/Cu coatings present sufficient adhesion strength. In addition, the existing state of additive Cu in the TiAlN/Cu coatings is also investigated. Copyright (C) 2017, The editorial office of Journal of Materials Science & Technology. Published by Elsevier Limited.

引用

页码：111 / 116

页数：6

共 25 条

[1] Influence of the sputtering gas on the preferred orientation of nanocrystalline titanium nitride thin films [J].

Banerjee, R ;

Chandra, R ;

Ayyub, P .

THIN SOLID FILMS, 2002, 405 (1-2) :64-72

[2] Fundamental structure forming phenomena of polycrystalline films and the structure zone models [J].

Barna, PB ;

Adamik, M .

THIN SOLID FILMS, 1998, 317 (1-2) :27-33

[3] An overview of the potential of quantitative coating adhesion measurement by scratch [J].

Bull, SJ ;

Berasetegui, EG .

TRIBOLOGY INTERNATIONAL, 2006, 39 (02) :99-114

[4] Study on thermal stability and mechanical properties of nanocomposite Zr-W-B-N thin films [J].

Dubey, P. ;

Arya, V. ;

Srivastava, S. ;

Singh, D. ;

Chandra, R. .

SURFACE & COATINGS TECHNOLOGY, 2015, 284 :173-181

[5] THE DEVELOPMENT OF GRAIN-STRUCTURE DURING GROWTH OF METALLIC-FILMS [J].

GROVENOR, CRM ;

HENTZELL, HTG ;

SMITH, DA .

ACTA METALLURGICA, 1984, 32 (05) :773-781

[6] Comparison of the tribological and antimicrobial properties of CrN/Ag, ZrN/Ag, TiN/Ag, and TiN/Cu nanocomposite coatings [J].

Kelly, P. J. ;

Li, H. ;

Benson, P. S. ;

Whitehead, K. A. ;

Verran, J. ;

Arnell, R. D. ;

Iordanova, I. .

SURFACE & COATINGS TECHNOLOGY, 2010, 205 (05) :1606-1610

[7] Thermal stability and oxidation resistance of arc evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN coatings [J].

Koller, C. M. ;

Hollerweger, R. ;

Sabitzer, C. ;

Rachbauer, R. ;

Kolozsvari, S. ;

Paulitsch, J. ;

Mayrhofer, P. H. .

SURFACE & COATINGS TECHNOLOGY, 2014, 259 :599-607

[8] Tribological properties characterization of Ti/Cu/N Thin films prepared by DC magnetron sputtering on titanium alloy [J].

Li, Junxia ;

Zhang, Huiqiao ;

Fan, Ailan ;

Tang, Bin .

SURFACE & COATINGS TECHNOLOGY, 2016, 294 :30-35

[9] Hard nanocomposite Ti-Cu-N films prepared by dc reactive magnetron co-sputtering [J].

Li, ZG ;

Miyake, S ;

Kumagai, M ;

Saito, H ;

Muramatsu, Y .

SURFACE & COATINGS TECHNOLOGY, 2004, 183 (01) :62-68

[10] REVISED STRUCTURE ZONE MODEL FOR THIN-FILM PHYSICAL STRUCTURE [J].

MESSIER, R ;

GIRI, AP ;

ROY, RA .

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1984, 2 (02) :500-503

← 1 2 3 →